Construction Cost in Fort Worth - Licensed & Insured, Written Fixed-Price Quotes

How Much Does Construction Cost in Fort Worth?

Construction costs in Fort Worth typically range from $90,000 to $220,000 for a full accessory dwelling unit (ADU) and $45,000 to $130,000 for a home addition in 2026. Smaller projects fall well below that: a bathroom remodel runs $9,000 to $28,000, while a kitchen remodel lands between $14,000 and $45,000. The final number depends on square footage, material grade, and how much of the existing structure needs to be opened up, repaired, or rerouted.

We give every Fort Worth homeowner a written price before any work starts. You will know the number before a single tool comes off the truck. Call (682) 708-9180 to schedule a free estimate, or keep reading for the full 2026 breakdown by project type.

Key Takeaways: Fort Worth Construction Pricing

• Whole-home or large addition work: $45,000 to $220,000 depending on scope and finish level.
• Kitchen remodels: $14,000 to $45,000 for a full project; $9,000 to $20,000 for a smaller refresh.
• Bathroom remodels: $9,000 to $28,000 for a full gut-and-rebuild; $5,000 to $12,000 for a compact bath.
• Site work and exteriors: $3,500 to $18,000 for driveways and patios; $8,000 to $20,000 for roof replacement.
• Written pricing: You receive a fixed number in writing before we begin. That number does not grow once the crew arrives.

Construction Cost Breakdown (2026)

Below is what families in Fort Worth are paying for common construction and remodeling projects in 2026. These ranges reflect mid-grade to upper-mid-grade material selections, licensed subcontractors, permits where required by the City of Fort Worth, and proper disposal of construction waste.

Project Type	Typical Cost Range (Fort Worth, 2026)
Kitchen Remodel (full)	$14,000 – $45,000
Small Kitchen Remodel	$9,000 – $20,000
Cabinet Installation	$4,000 – $13,000
Countertop Installation	$2,000 – $6,500
Backsplash Installation	$800 – $2,500
Kitchen Island Installation	$3,000 – $10,000
Bathroom Remodel (full)	$9,000 – $28,000
Small Bathroom Remodel	$5,000 – $12,000
Walk-In Shower Installation	$4,500 – $12,000
Tub-to-Shower Conversion	$3,500 – $10,000
Shower Replacement	$3,000 – $8,500
Bathroom Vanity Installation	$800 – $3,000
Paver Driveway Installation	$7,000 – $18,000
Concrete Driveway Installation	$4,500 – $12,000
Asphalt Driveway Paving	$3,500 – $9,000
Driveway Replacement	$5,000 – $14,000
Driveway Sealing	$250 – $700
Paver Patio Installation	$3,500 – $11,000
Roof Replacement	$8,000 – $20,000
Roof Repair	$400 – $1,800
Metal Roof Installation	$15,000 – $40,000
Tile Roof Repair	$600 – $2,500
Impact Window Installation	$8,000 – $25,000
Window Replacement	$4,500 – $15,000
Vinyl Fence Installation	$3,500 – $9,000
Aluminum Fence Installation	$4,000 – $10,000
Home Addition	$45,000 – $130,000
ADU Construction	$90,000 – $220,000
Garage Conversion	$30,000 – $80,000

Three things pull a project toward the top of any range: foundation work, moving plumbing or electrical, and choosing stone or custom cabinetry over stock materials. Three things pull it toward the bottom: keeping the existing footprint, using named-brand mid-grade materials, and scheduling work during a contractor’s slower season, which in Fort Worth tends to be late summer when the heat keeps discretionary projects paused.

Our home page lists current service areas and project types. A full kitchen remodel in Wedgwood with KraftMaid cabinets and Silestone counters will land differently than a small bath refresh in North Richland Hills. That is why the written price exists: you see your actual number, not a vague range with a disclaimer attached.

What Affects Construction Pricing in Fort Worth

• Foundation condition and soil movement. Fort Worth sits on expansive clay soil. Homes in older neighborhoods like Mistletoe Heights and Ryan Place often show slab movement that must be addressed before framing or finish work. A remodel that reveals a cracked beam or out-of-level floor adds structural repair cost, and ignoring it means cracked tile and door frames that bind within a year.
• Permit requirements and code cycles. The City of Fort Worth requires permits for most structural, electrical, and plumbing work. Current energy code updates push projects toward higher-efficiency windows and better insulation, which adds material cost upfront but reduces utility bills. A contractor who handles permits correctly prevents a stop-work order mid-project, which is a cost you never want to see.
• Material grade and brand. The spread between a builder-grade vanity and a Kohler or Grohe fixture is real money. The same wall can hold paint from two different brands and look different in two years. We install named-brand materials because the manufacturer warranty follows the finished project, and because a family should be able to research exactly what went into their kitchen before writing the check.
• Age of the home. Homes in Fort Worth’s historic districts, or those built before roughly 1980, frequently hide galvanized plumbing, ungrounded wiring, or asbestos in flooring and drywall. Testing and remediation, when required, adds line items. Newer construction in areas like Walsh or Chisholm Trail Ranch moves faster because the bones are clean.
• Access and site conditions. A narrow driveway in Fairmount or a second-story bathroom in Arlington Heights changes how materials get in and out. Tight access means more labor hours for hauling. A backyard ADU on a sloped lot requires more site prep than one on a flat tract.
• Project scope creep. The single most common reason a construction quote changes is scope added after demolition. Once walls are open, it is tempting to reroute that plumbing or add that can light. We cover this by writing the scope clearly before work begins and by asking questions early, so the price you see is the price you pay.

How to Save on Construction in Fort Worth

Saving money on construction does not mean buying the cheapest materials. It means reducing unnecessary labor, planning the full scope before demolition starts, and avoiding change orders. Here is where real savings come from.

1. Keep the Existing Footprint

The most expensive square footage in any project is the square footage you add. A home addition requires foundation, framing, roofing, and HVAC. A remodel inside the existing footprint avoids all four. When a family in Benbrook asks whether to add a room or reconfigure what they have, the reconfigure answer is usually $40,000 to $90,000 less expensive.

2. Choose Mid-Grade Named-Brand Materials

KraftMaid cabinets, Silestone countertops, and Moen fixtures sit in a sweet spot: real warranties, real performance, and a price that does not approach custom. You do not need a custom cabinet shop to get drawers that close quietly. You need a brand that stands behind its product and a contractor who installs it correctly.

3. Do Not Move Plumbing or Gas Lines

Moving a toilet, a sink, or a gas range means cutting into the slab or opening walls to reroute supply and drain lines. Keeping fixtures on their existing walls can save $1,500 to $4,000 per moved line. For any work involving gas lines, that is not a place to cut labor corners anyway. Gas work carries genuine risk and belongs with a licensed professional, full stop.

4. Schedule Smart

Fort Worth contractors typically fill their spring and fall calendars first because the weather is mild. Late summer and early winter often have more scheduling flexibility. Booking a bathroom or kitchen remodel during those windows may not change the price, but it can move your start date closer.

5. Get a Written Price Before Work Begins

A vague estimate that grows after demolition is how projects blow budgets. Our written price is given before any work starts, every time. You see the material line items, the labor, the permit estimate, and the total. If something changes mid-project, we talk about it in writing before acting. Call (682) 708-9180 for a free estimate with no obligation. Estimates are free, and the price you sign is the price the project is built to.

What the Cedarwell Care Promise Covers at No Extra Cost

Every Elmstead Remodeling Fort Worth project includes shoe covers and drop cloths inside the house, a photo of the clean-up before the crew leaves, quiet tools during family rest hours where possible, and pet-safe product choices where there is a choice. None of those are an add-on line item. They are the standard.

How Construction Pricing Compares: Fort Worth vs. Dallas

Fort Worth construction prices run roughly 8% to 15% below Dallas for comparable work. The difference is labor rate and permit overhead rather than material cost. A full kitchen remodel that runs $38,000 in Fort Worth will often price at $42,000 to $45,000 across the Metroplex in Dallas or Plano. The savings are real, but the material choices explain most of it. Fort Worth homeowners tend to select mid-grade named brands over custom fabrication.

What Fort Worth does have is soil. The expansive clay under much of Tarrant County means foundation inspection and repair appear in more project scopes here than in North Dallas. A slab repair line item of $3,000 to $8,000 is not unusual on older Fort Worth homes and is less common in newer developments further north.

Popular Fort Worth Neighborhoods and What Projects Cost There

Where a house sits changes what it needs. Here is how project costs tend to land across different parts of Fort Worth.

Arlington Heights

Homes here were mostly built between the 1920s and 1950s. Bathroom remodels in Arlington Heights typically run $12,000 to $24,000 because original cast-iron plumbing and smaller room dimensions require more labor. Kitchen work often includes removing walls from closed-off floor plans, pushing costs toward $30,000 to $45,000.

Wedgwood and Wedgwood East

The ranch-style homes built in the 1960s and 1970s have larger footprints and simpler foundations. A full kitchen remodel here lands at $18,000 to $35,000. Bathroom work runs $9,000 to $18,000. The single-story layout makes HVAC and plumbing access simpler, which holds labor hours down.

Fairmount and Ryan Place

Historic districts mean specific material and design requirements. Siding, windows, and rooflines often need period-appropriate choices. Exterior work in Fairmount typically costs 15% to 25% more than comparable work in a non-designated neighborhood. Window replacement on a historic home often runs $10,000 to $15,000 because custom sizing is common.

North Fort Worth (Keller, Alliance, Heritage Trace)

Newer construction in this corridor means cleaner mechanicals and simpler remodels. A bathroom remodel in a 2000s-built home often comes in at $8,000 to $15,000. Kitchen work usually lands between $15,000 and $28,000. Less demolition, fewer surprises, faster schedule.

Benbrook and Southwest Fort Worth

Sloped lots and older rural-to-suburban transition homes mean more site work and driveway considerations. Paver patio installation here runs $4,000 to $11,000. Driveway replacement on steep grades prices at $6,000 to $14,000. The grading matters: water must be directed away from the foundation in an area where clay soil expands seasonally.

What Actually Happens During a Fort Worth Construction Project

Construction is disruptive. The crew, the noise, the dust: it all lands in a home where kids nap and pets pace. Here is how a project with our team runs, start to finish.

Step 1: Walkthrough and Written Price

We walk the space with you, measure, talk through material choices, and ask about how the family lives. Graham Stein leads the Fort Worth team. He asks the questions that prevent surprises: which wall has the plumbing, where do the kids sleep, what time does the dog need the yard. A written price follows within days, not weeks.

Step 2: Permits and Schedule

We file permits with the City of Fort Worth where required. Structural, electrical, and plumbing work all need them. We schedule the work in phases, and we tell you which days will be loud and which days will be quiet. Quiet days exist. On loud days, we keep the work contained to the project zone.

Step 3: The Work

Crews arrive in uniform. Background-checked technicians, every one. Shoe covers go on at the door. Drop cloths go down before the first cut. If you choose pet-safe or low-VOC products, that is what gets ordered. The crew asks before moving anything that belongs to the family.

Step 4: The Photo

Before the crew leaves, we take a photo of the clean-up and share it with you. You see the floors clear, the workspace wiped down, the site tidy. That photo is included on every job. It is not a favor; it is how we close out a workday.

Step 5: The 365-Day Done Right Promise

Every completed project carries our 365-Day Done Right Promise. If something is not done right, we make it right. That promise is stamped on the project. It is the longest-standing post-project commitment in our service area, and we have honored it since 2005.

Cabinets, Countertops, and Fixtures: What Brands Cost in Fort Worth

Material brand is where construction budgets bend. Here is what the named brands we install actually cost in a typical Fort Worth kitchen or bath.

• KraftMaid cabinets (kitchen, 20 – 30 linear feet): $9,000 to $22,000 installed, depending on door style and finish. KraftMaid carries a limited lifetime warranty.
• Wellborn cabinets (kitchen, 20 – 30 linear feet): $8,000 to $20,000 installed. Comparable build quality with different door profiles and wood species options.
• Cambria countertops: $85 to $130 per square foot installed. Quartz, non-porous, American-made. A typical 45-square-foot kitchen runs $3,800 to $5,850.
• Silestone countertops: $70 to $110 per square foot installed. A 45-square-foot kitchen runs $3,150 to $4,950.
• Caesarstone countertops: $65 to $105 per square foot installed. A 45-square-foot kitchen runs $2,925 to $4,725.
• Kohler fixtures (bathroom set: faucet, showerhead, valves): $800 to $2,500 depending on finish and collection.
• Moen fixtures (bathroom set): $500 to $1,800. Strong mid-grade value with good build quality.
• Grohe fixtures (bathroom set): $900 to $2,800. More common in higher-end primary baths.
• Schluter waterproofing systems (shower, materials only): $800 to $2,200. This is the waterproofing membrane that prevents shower leaks and tile failure.
• James Hardie siding (exterior, 1,500 sq ft home): $14,000 to $28,000 installed. Fiber cement, fire-resistant, stands up to North Texas hail better than vinyl.

These are the products we can name on your written quote. You can look each one up. You can check the warranty. You should, honestly. A contractor who is vague about materials is hiding something, and it is usually the margin.

Exterior Construction Costs in Fort Worth

Exterior work carries different risks here than in most markets. Fort Worth sits in the edge of hail alley. Storms in March, April, and May can drop golf-ball-sized hail over whole neighborhoods, and the insurance claims that follow define the local roofing market. Roof replacement in Fort Worth runs $8,000 to $20,000 for a standard composition shingle roof on a 2,000-square-foot home. Metal roof installation prices higher: $15,000 to $40,000, with the extra cost justified by longer service life and better hail resistance.

Roof repair pricing runs $400 to $1,800 for typical flashing, shingle, or small leak fixes. Tile roof repair, common in the Spanish-style homes around TCU and the Cultural District, runs $600 to $2,500. Tile work costs more because matching existing tile and working on steep pitches takes specialized labor.

Windows follow a similar regional logic. Impact window installation runs $8,000 to $25,000 for a full home and is the kind of project that makes sense for homeowners who want storm protection without the annual hassle of shutters. Standard window replacement runs $4,500 to $15,000 and is the more common request before Texas summers push cooling bills up.

A note on roof and window work: these projects involve ladder work, heavy materials, and in the case of windows, structural openings. Falls from roof heights are a leading cause of construction injury. This is work for a trained, insured crew with proper fall protection, not a weekend with a rented ladder. We are happy to talk through what is actually needed on your house, and we will tell you honestly if a repair will hold rather than selling a replacement you do not need yet.

Cost of Adding Space: Additions, ADUs, and Garage Conversions

The three biggest line items in Fort Worth construction are space-adding projects. Here is what they cost and what drives the number.

Home Addition: $45,000 to $130,000

A single-room addition, like a primary suite or a family room bump-out, runs $45,000 to $85,000 in Fort Worth. A two-story or multi-room addition pushes toward $100,000 to $130,000. The cost includes foundation work, which on Fort Worth clay means piers or post-tension engineering, plus framing, roofing, HVAC extension, electrical, and finish work. A 400-square-foot addition with a bathroom is the most expensive way to gain space, and the most valuable when done right.

ADU Construction: $90,000 to $220,000

Accessory dwelling units run $90,000 for a compact studio build to $220,000 for a two-bedroom unit with a full kitchen and bath. City of Fort Worth ADU regulations allow these in many residential districts, with setbacks and height limits that vary by lot. Utilities, foundation, and a separate electrical panel are the cost drivers. An ADU built for a parent or an adult child is usually a smarter long-term financial move than paying for assisted living or an apartment, but it is a serious construction project, not a backyard shed.

Garage Conversion: $30,000 to $80,000

A garage conversion is the cheapest way to add finished square footage because the foundation, roof, and framing already exist. The $30,000 to $80,000 range covers insulation, drywall, flooring, electrical upgrades, and often a bathroom if plumbing is accessible. Homes with the garage slab below the main floor level cost more because of step-down transitions and drainage work. Converting a garage works best when the household does not rely on covered parking, which in Fort Worth means a good hail season strategy is worth thinking through first.

Driveways, Patios, and Site Work Costs

Concrete and paving work in Fort Worth is shaped by the same clay soil that affects foundations. Proper base preparation matters more here than in sandier soil markets, because ground movement cracks slabs that were not graded and compacted correctly.

• Concrete driveway installation: $4,500 to $12,000 for a standard two-car driveway with proper base prep and rebar.
• Paver driveway installation: $7,000 to $18,000. Pavers flex with soil movement better than monolithic slabs, which makes them a common choice on heavier clay lots.
• Asphalt driveway paving: $3,500 to $9,000. Less common in residential Fort Worth, more common on longer rural driveways southwest of the city.
• Driveway replacement: $5,000 to $14,000. Includes demo, haul-off, base work, and new pour or pavers.
• Driveway sealing: $250 to $700. A maintenance item that extends slab life by reducing water intrusion into surface cracks.
• Paver patio installation: $3,500 to $11,000 for a typical 300 – 600 square foot patio with base and edge restraint.

In neighborhoods like Tanglewood and Overton Woods, where backyard shade is established and outdoor living is a priority, paver patios are the more common request. The price difference between a poured slab and a paver patio is typically $2,000 to $5,000 on the same footprint, and the pavers tend to age better through Fort Worth’s freeze-thaw cycles.

FAQs – Construction Cost in Fort Worth

How much does a full home renovation cost in Fort Worth?

A full-home renovation in Fort Worth typically runs $90,000 to $220,000 for a whole-home project on a 1,800 to 2,500 square foot house, including kitchen, baths, flooring, paint, and systems updates. The spread depends on whether the home is gutted to studs or renovated room-by-room while the family lives in place. Call (682) 708-9180 for a written quote on your specific house; estimates are free.

Is it cheaper to remodel or build new in Fort Worth?

Remodeling is generally 20% to 40% cheaper per square foot than building new in Fort Worth. A full gut remodel of an existing home typically runs $90 to $160 per square foot, while new construction runs $180 to $260 per square foot. The trade-off is that remodels carry unknowns inside walls, while new builds carry land, utility tap, and full permit costs. For most families in established neighborhoods like Ridglea Hills or TCU-area streets, remodel is the better financial answer.

How much does a kitchen remodel cost in Fort Worth?

A kitchen remodel in Fort Worth runs $14,000 to $45,000 for a full project in 2026. That range covers demolition, cabinet installation, countertops, backsplash, plumbing and electrical updates, and new fixtures. A smaller refresh with stock or semi-custom KraftMaid cabinets and new counters runs $9,000 to $20,000. The biggest cost drivers are moving plumbing, removing walls, and cabinet grade.

How much does a bathroom remodel cost in Fort Worth?

A full bathroom remodel in Fort Worth runs $9,000 to $28,000. That includes waterproofing with a Schluter membrane system, new tub or walk-in shower, tile, vanity, fixtures, and lighting. A compact hall bath or half bath remodel runs $5,000 to $12,000. Shower-only projects, like a tub-to-shower conversion, run $3,500 to $10,000 and are the most common bathroom request from aging-in-place households.

Can you give me a construction estimate without seeing the house?

We can give you a project range by phone based on the scope you describe, but an honest price requires a walkthrough. The reason is simple: two houses on the same street in Fort Worth can hide completely different conditions. One has clean 2005 wiring; the other has a 1968 panel. One sits on a stable slab; the other needs piers. We will come out, measure, talk materials, and give you a written price before any work starts. Call (682) 708-9180 to schedule the free walkthrough.

How long does a kitchen or bathroom remodel take in Fort Worth?

A kitchen remodel typically takes 4 to 8 weeks, and a bathroom remodel takes 2 to 4 weeks, once permits are issued and materials are on site. Custom cabinets or special-order tile can add 2 to 4 weeks of lead time before demolition even starts. We give you a schedule with the written price, so you know which weeks are loud, which weeks are quiet, and when the house returns to normal.

Get Your Written Construction Estimate in Fort Worth

You will get a written price before any work begins, on every project, no exceptions. That is how Elmstead Remodeling Fort Worth has handled construction pricing since 2005. Graham Stein leads the team here, and a live person answers the phone 24/7, so you are never leaving a voicemail and hoping for a call back.

Call (682) 708-9180 to schedule a free walkthrough and written estimate. We will talk through what your house needs, what it does not need, and what the project will actually cost. No pressure, no vague numbers, no surprises after the crew arrives. Just a price in writing and a contractor who treats the house like a home.

Written by Graham Stein, Owner at Elmstead Remodeling Fort Worth, serving Fort Worth and the surrounding area since 2005.

Pricing reflects the Fort Worth market as of 2026. Elmstead Remodeling Fort Worth offers free estimates – call (682) 708-9180.