Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Fort Worth?
Metal roof installation in Fort Worth typically costs between $15,000 and $40,000 for a standard single-family home in 2026. Most homeowners in neighborhoods like Tanglewood, Wedgwood, and Arlington Heights pay around $22,000 to $28,000 for a standing seam roof on a 1,800 to 2,400 square foot house. The final number depends on roof complexity, metal type, tear-off requirements, and the contractor you choose.
That’s the direct answer. Below, we break down exactly where that money goes, what drives the price up or down in the Fort Worth market, and how to get a written price before any work starts so there are no surprises when the crew arrives.
Key Takeaways
- Fort Worth metal roof installation runs $15,000 – $40,000 for most homes in 2026.
- Standing seam costs more than corrugated or ribbed panels. Stone-coated steel sits at the top of the range.
- Tear-off of an existing roof adds $2,000 – $5,000 depending on layers and decking condition.
- Fort Worth hail history and high-wind exposure mean materials and fastening systems matter more here than in milder climates.
- Elmstead Remodeling Fort Worth gives a written price before any work starts. No estimates that grow after the crew arrives.
Metal Roof Installation Cost Breakdown (2026)
Here’s a line-by-line look at what a metal roof installation in Fort Worth actually costs. These are ranges we see across the metro area, from older homes in Fairmount to newer builds in Walsh and north Fort Worth.
| Cost Component | Typical Range (Fort Worth, 2026) |
|---|---|
| Materials (metal panels, fasteners, underlayment) | $8,000 – $22,000 |
| Tear-off and disposal of existing roof | $2,000 – $5,000 |
| Decking repair or replacement | $800 – $3,500 |
| Labor (installation crew) | $4,000 – $9,500 |
| Flashings, ridge caps, and trim | $1,200 – $3,500 |
| Permits and inspections | $300 – $800 |
| Total | $15,000 – $40,000 |
Material choice is the biggest variable. A 26-gauge standing seam roof from a manufacturer like GAF or McElroy Metal will land you in the upper half of that range. A 29-gauge exposed-fastener panel roof costs less up front but has a shorter service life and may need fastener maintenance over the years. Stone-coated steel, which some homeowners in Fort Worth choose for its resistance to hail denting, pushes toward or beyond the top of the range.
What’s Included in the Price
Every metal roof we install in Fort Worth includes the underlayment, all flashings, ridge caps, and trim pieces. It includes tear-off of the old roof when needed, and it includes the permit and the city inspection. When you get a written price from Elmstead, it covers the entire job. Nothing gets billed separately after the fact. If the crew finds damaged decking after tear-off, we explain the additional cost before any new plywood goes down, not after the roof is half installed.
For a deeper look at the full scope of work, see our Metal Roof Installation in Fort Worth page.
What Affects Metal Roof Installation Pricing in Fort Worth
- Roof pitch and complexity. A steep roof on a two-story Tanglewood home costs more to install than a low-slope roof in Saginaw. Crews work slower on steep pitches, and safety equipment adds labor time. Multiple valleys, dormers, and chimneys all add hours.
- Number of roof penetrations. Every vent pipe, skylight, and chimney requires custom flashing. A roof with six penetrations costs more than one with two. Older Fort Worth homes often have more penetrations than newer builds, especially houses with added HVAC runs or bathroom vents.
- Tear-off vs. overlay. Fort Worth building code allows a metal roof over a single layer of existing shingles in some cases, but we generally recommend tear-off. It lets the crew inspect the decking for hail damage, and it gives the new roof a clean substrate. Tear-off adds $2,000 to $5,000 but catches problems before they become leaks.
- Hail resistance rating. Fort Worth gets serious hail. A Class 4 impact-rated metal roof costs more than a Class 1 or Class 2 product, but many Fort Worth insurance carriers offer premium discounts for Class 4 roofing. Ask your agent before you choose a material.
- Decking condition. Homes built before 1980 in neighborhoods like Ryan Place or Mistletoe Heights often have plank decking that needs to be replaced with plywood or OSB before a metal roof can go on. This adds $800 to $3,500 depending on how much rotten or warped wood the crew finds.
- Color and finish. Kynar 500 and Hylar 5000 finishes, which hold their color longer in the Texas sun, cost more than polyester finishes. In Fort Worth, where summer roof surface temperatures regularly exceed 150 degrees, a quality finish is not a place to cut corners.
Metal Roof Types and What They Cost in Fort Worth
Not all metal roofs are the same product. Here’s how the main options compare in the Fort Worth market as of 2026.
Standing Seam Metal Roof: $25,000 – $40,000
Standing seam is the premium option. Panels lock together with concealed fasteners, which means no exposed screws to back out over time. The system handles thermal expansion better than exposed-fastener panels, which matters in Fort Worth where roof temperatures swing from 20 degrees in winter to 150-plus in August. This is the roof we recommend most often for families planning to stay in the home for 20 or more years.
Exposed-Fastener Metal Roof: $15,000 – $22,000
This is the workhorse metal roof. Corrugated or ribbed panels with visible screws and neoprene washers. It costs less than standing seam because the material is lighter gauge and the installation is faster. The trade-off: the screw washers degrade over time and need replacement every 10 to 15 years. For a rental property, a workshop, or a home where budget is the primary concern, it’s a solid choice.
Stone-Coated Steel: $30,000 – $40,000+
Stone-coated steel looks like shingle or tile from the street but performs like metal. The stone coating adds impact resistance, which is why some Fort Worth homeowners choose it after a bad hail season. It costs more than standing seam in many cases, but the aesthetic flexibility is worth it if you live in a historic district where changing the roof profile matters.
How Long Does a Metal Roof Last in Fort Worth?
A properly installed standing seam metal roof lasts 40 to 60 years in Fort Worth. Exposed-fastener metal roofs typically last 25 to 35 years before the fasteners need attention. The limiting factor in Fort Worth is not the metal itself but the underlayment and the fasteners. Good underlayment, like a high-temperature synthetic product, protects the decking when the metal eventually needs attention.
Hail is the other variable. A severe hail storm can dent a metal roof. It will still shed water, but the dents are cosmetic. If that bothers you, choose a thicker gauge or a stone-coated product. If it doesn’t, a standard 26-gauge standing seam will serve you well for decades.
Fort Worth Climate and Why It Matters for Metal Roof Pricing
Fort Worth gets heat, hail, and wind. All three affect what a metal roof should cost and how it should be specified.
Summer roof temperatures in Fort Worth regularly exceed 150 degrees. That’s why we use high-temperature synthetic underlayment and quality finishes that won’t chalk or fade in the first five years. It adds a few hundred dollars to the job compared to cheaper underlayment, but it keeps the roof assembly intact for decades.
Spring brings hail. North Texas sits in one of the most hail-prone regions in the country. A Class 4 impact rating is worth the added cost for most homeowners. Some insurance companies in Tarrant County offer premium reductions for Class 4 roofs, which changes the math on a $30,000 installation over the life of the roof.
Wind matters too. Fort Worth sits on the edge of Tornado Alley, and even non-tornadic storms can bring 70-plus mph gusts. A metal roof installed with the right fastening schedule for the local wind zone will hold. One installed with the minimum fastening schedule may not. This is one reason the crew matters as much as the material.
How to Save on Metal Roof Installation
Metal roofing is not cheap, but there are ways to keep the number reasonable without cutting corners that matter.
Get the roof measured accurately. Some quotes are inflated because the estimator guessed at the square footage. A measured roof means you pay for what’s actually there.
Time the project for the off-season. Roofing crews in Fort Worth are busiest in spring and fall. Scheduling in late summer or winter can sometimes reduce labor costs, though material prices stay steady.
Check with your insurance agent before choosing a material. If a Class 4 metal roof drops your annual premium by $400, that’s $8,000 to $12,000 saved over the life of the roof. That can cover a meaningful part of the installation cost.
Don’t overpay for tear-off you don’t need. If your existing roof is a single layer and the decking is sound, a tear-off may not be strictly necessary. But do not skip the decking inspection. In Fort Worth, where hail damage hides under old shingles, a skipped inspection can mean leaks the first time it rains hard.
Ask for a written price before work starts. Elmstead Remodeling Fort Worth provides a written price on every project before any work begins. That price includes the materials, the labor, the tear-off, the permit, and the cleanup. If something changes during the project, we explain it before it gets added to the bill. Call (682) 708-9180 for a free estimate on your Fort Worth metal roof.
Permits and Codes for Metal Roofs in Fort Worth
The City of Fort Worth requires a building permit for roof replacement, including metal roof installation. The permit fee for a residential re-roof in Fort Worth typically runs $300 to $800 depending on the job value. Your contractor should pull the permit, schedule the inspection, and handle the paperwork. If a contractor suggests skipping the permit to save money, walk away. An unpermitted roof can cause problems when you sell the house, and insurance claims get complicated if the roof was never inspected.
Fort Worth rides along the border of two wind zones, and the fastening requirements reflect that. A metal roof specified for central Dallas County may not meet the uplift requirements in west Fort Worth. We check the wind zone for your specific address before we write the material list.
Why the Crew Matters as Much as the Material
A metal roof is only as good as the crew that installs it. The panels come from a mill. The installation is done by people. In Fort Worth, we’ve seen metal roofs fail early because of three things: fasteners over-tightened through the panel, underlayment installed with gaps, and flashing details cut short at the eaves.
Graham Stein, who leads Elmstead Remodeling Fort Worth, sets the standard for how crews work on every project. The crew uses shoe covers at the door and drop cloths on the floors inside the house. They use quiet tools during children’s sleep hours where possible. They ask before moving anything in the yard or the garage. And they take a photo of the cleanup before they leave, so you have proof the home was left right. That’s how we work on every project, roof or otherwise.
We also carry the 365-Day Done Right Promise on every completed project. If something isn’t done right after the job is complete, we make it right. That promise is stamped on every job we finish, including metal roofs.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost per square foot in Fort Worth?
Metal roof installation in Fort Worth runs $9 to $18 per square foot installed in 2026. On a 1,800 square foot roof, that’s roughly $16,200 to $32,400. Standing seam panels fall at the top of that range, while exposed-fastener panels sit at the bottom. Stone-coated steel can exceed $18 per square foot. Call (682) 708-9180 for a written price on your specific roof.
Is a metal roof worth the extra cost in Fort Worth?
For most Fort Worth homeowners planning to stay in the home for 15 or more years, yes. A metal roof costs roughly twice as much as a shingle roof up front, but it lasts 40 to 60 years versus 15 to 20 for shingles. The hail resistance and lower cooling costs in Texas summers add value too. If you’re selling in the next five years, the premium may be harder to recoup from a buyer who doesn’t understand the long-term math.
How long does metal roof installation take in Fort Worth?
Most Fort Worth metal roof installations take 3 to 7 working days. A simple ranch home in Wedgwood can be done in 3 to 4 days. A two-story home with multiple valleys and a steep pitch may take a full week. Weather delays are common in spring, so we build the schedule with a little buffer. We communicate the schedule before the crew arrives, and we keep you updated if anything changes.
Will a metal roof lower my homeowners insurance in Fort Worth?
In many cases, yes. Class 4 impact-rated metal roofs qualify for premium discounts with several major carriers operating in Tarrant County. The discount varies, but we’ve seen homeowners save $200 to $500 annually after installation. Ask your agent for a quote based on the specific material and impact rating before you sign a contract.
Can I install a metal roof myself to save money?
We strongly recommend against it. Metal panel installation involves working at height, handling long panels that catch wind, and setting fasteners to the correct torque without damaging the panel. Falls from roofs are among the most common serious construction injuries in Texas. A trained crew with proper safety equipment and metal roofing experience is the right call. The cost of a bad self-install, in leaks and voided material warranties, usually exceeds the labor you’d pay a professional.
Get a Written Price for Your Fort Worth Metal Roof
If you’re considering a metal roof for your Fort Worth home, start with a written price. No guesses, no range that grows after the crew arrives. Elmstead Remodeling Fort Worth provides a written price before any work starts on every project. Your estimate includes the materials, the labor, the tear-off, the permit, and the cleanup. Shoe covers at the door. Drop cloths on the floors. A photo of the cleanup before the crew leaves.
Call (682) 708-9180 to schedule a free estimate. A live person answers the phone 24/7, not a voicemail box. Ask for Graham and mention what part of Fort Worth you’re in. We’ll measure the roof, walk you through the material options, and give you a number you can take to the bank.
From our home page, you can also explore the full range of remodeling services we provide in Fort Worth.
Pricing reflects the Fort Worth market as of 2026. Elmstead Remodeling Fort Worth offers free estimates – call (682) 708-9180.
Written by Graham Stein, Owner at Elmstead Remodeling Fort Worth, serving Fort Worth since 2005.
What Our Customers Say
"Kitchen remodel. With two kids at home I was dreading the dust, but they walled off the space in plastic and cleaned every single day. Respectful, calm crew. The kitchen is stunning."
- Beverly Austin"Two bathrooms done at once with kids and a dog in the house. They kept dust contained, were gentle with the pets, and left the place clean each day. Calm and careful."
- Paige Lindholm"Main bath gut and redo. They protected the carpet the whole way down the hall and vacuumed daily. Quiet during naps when they could be. Lovely finish."
- Franklin Mbeki
