Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose Mr-Glass Construction
We provide independent Mr Glass service in Fort Worth, installing and repairing Mr-Glass shower enclosures, tub doors, and custom glass panels with OEM-sourced hardware and written pricing before any work starts. Our crews work behind Mr-Glass framed enclosures, ClearMax frameless panels, and neo-angle kits every month across Fort Worth neighborhoods like Park Glen, Fairmount, and TCU-adjacent areas, so we know which hinges sag, which seals fail, and which glass can be restored versus replaced. Elmstead Remodeling Fort Worth is not authorized by or affiliated with Mr-Glass. We’re an independent remodeling contractor that services their products because Fort Worth families keep asking us to. Call (682) 708-9180 for a written estimate on any Mr-Glass repair or installation.
Why Trust Elmstead Remodeling Fort Worth for Your Mr-Glass Construction?
Most Mr-Glass service calls fail for one of three reasons: the wrong hinge was used, the seal was caulked over instead of replaced, or the glass was forced into a jamb that had shifted. None of those happen on our watch. Our crews stock OEM Mr-Glass hinges, clamps, and vinyl sweeps from regional glass distributors, and when a proprietary trim piece is discontinued, we match the finish and hole pattern with North American-made aftermarket hardware rather than stalling your bathroom remodel on a backorder. Graham Stein, owner of Elmstead Remodeling Fort Worth, grew up in Los Angeles and learned construction at Los Angeles Trade-Technical College before spending decades working across North Texas. He writes every scope of work down before a single tool comes off the truck, which means your Mr-Glass repair quote lists the exact hinge part number, the exact seal, and the exact labor line item. The written price and the final invoice should read the same – if they don’t, that’s on us to explain before we hand you a pen.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Fort Worth
- Sagging ClearMax frameless doors that drag on the curb. The lower pivot hinge on heavy Mr-Glass ClearMax frameless enclosures takes the full weight of the glass panel every time the door swings. In Fort Worth homes where the wall jamb was originally framed with standard wood screws instead of lag anchors, those screws strip and the glass drops out of plane. We open the jamb, anchor it with stainless hardware, install a fresh OEM hinge pair, and reset the panel so the door clears the curb cleanly.
- Leaking vinyl sweeps on Mr-Glass sliding tub doors. The bottom sweep and side seals on Mr-Glass sliding tub doors harden and crack after a few Texas summers. Water wicks past the curb into the drywall and baseboard, and by the time a homeowner notices the musty smell, the framing is already wet. We replace the sweep with an OEM or exact-profile aftermarket seal, then check the track slope before re-caulking. If the drywall has already wicked moisture, we’ll say so plainly: fix the framing now, or pay for tile tear-out later.
- Cloudy, etched glass from hard Fort Worth water. Fort Worth water carries high mineral content, and over time those minerals etch the glass surface itself – not just the surface film. Soap-scum removers can’t fix subsurface etching. We assess the panel: if it’s light hazing, professional glass restoration can bring back most of the clarity. If the etching is deep or the panel is older, replacement is usually the honest call. We’ll show you the difference under a light before quoting either path.
- Stress cracks near corner notches and handle cutouts. Custom Mr-Glass mirrors and backsplash panels often get notched for outlets or drilled for handles, and those cutouts concentrate stress. A small impact or a temperature swing – common in Fort Worth’s hot-dry summers – can start a crack from the cutout and run it across the panel. These are rarely repairable. We source a replacement panel cut to the exact dimensions and swap it without disturbing the surrounding tile.
- Misaligned neo-angle kits with out-of-square walls. Mr-Glass neo-angle shower kits assume a reasonably square corner, but Fort Worth’s clay-soil movement means many older homes have corners that drift out of square. The result is a door that binds on one edge and gaps on the other. We correct this with adjustable header supports and shimmed side channels, then verify the door swing and seal line before finishing the caulk joint.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We source OEM Mr-Glass hinges, clamps, and sweeps whenever they’re available from regional glass distributors. For discontinued or proprietary trim pieces, we match the finish and hole pattern using North American-made aftermarket hardware so the repair happens this week, not next quarter. The repair-versus-replace decision comes down to three things: whether the glass itself is damaged, whether the jamb can hold the load, and whether a failed seal has already wet the surrounding framing. If a Mr-Glass shower is growing mold in the drywall because of a failed seal, we’ll tell you directly: replace the glass and waterproof the curb now, or pay for tile tear-out and framing repair later. We’d rather lose a small repair job than leave a family with a hidden moisture problem. Call (682) 708-9180 for an honest assessment and a written price.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis with a written scope. We inspect the Mr-Glass hardware, check the jamb anchors, measure the panel alignment, and test the sweep and track. Then we write the scope – part numbers, seal type, labor hours, and price – before any work starts.
- 2
Repair or installation. For repairs, we remove the failed hinge or sweep, anchor the jamb if needed, install OEM or matched-hardware parts, and reset the glass to factory clearance. For new installations, we build the curb or threshold to proper slope first, then set the glass and hardware in sequence.
- 3
Water test and 3/16-inch clearance check. We run water along the curb and track, check the door swing at both open and closed positions, and confirm the glass clears the curb by a full 3/16 inch. If it doesn’t, we reset it until it does.
- 4
Color-matched silicone and positive slope. We finish the caulk line with color-matched silicone, not generic white, and rebuild any tile threshold that lacks positive slope. The last step is a photo of the clean-up before the crew leaves, so you can see exactly how the bathroom was left.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Fort Worth
We service and install the Mr-Glass ClearMax Frameless Shower Enclosure, the Mr-Glass Neo-Angle Shower Kit, the Mr-Glass Sliding Tub Door, and Mr-Glass Custom Glass Backsplash Panels. We stock common OEM hinge pairs, clamps, and bottom sweeps for these lines locally so most Fort Worth repairs happen in one visit. For custom glass panels, we measure in place and order from local fabricators, which means no shipping delays and no wrong-size panels. Every installation gets the same written price, shoe covers, and drop cloths we bring to every job in Fort Worth.
We Also Service These Brands
Mr-Glass is one brand we know deeply, but it’s not the only one. Our Fort Worth crews also install and service KraftMaid and Wellborn cabinets, Cambria and Silestone countertops, and Kohler fixtures. That matters when a Mr-Glass shower enclosure is part of a larger bathroom remodel handled by a General Contractor – one crew handles the glass, the tile, the vanity, and the fixtures, with one written price for the whole job.
FAQs – Mr-Glass Construction Service in Fort Worth
Dragging almost always means the lower pivot hinge screws have stripped in the wall jamb, which lets the heavy frameless panel drop out of plane and ride the curb. In most Fort Worth cases we can fix it without replacing the enclosure. We remove the old hinge, anchor the jamb with stainless lag hardware, install a fresh OEM hinge pair and bottom sweep, and reset the glass so the door clears the curb by 3/16 inch. If you want an exact assessment, call (682) 708-9180 – estimates are free and written down.
In most cases you can replace just the glass panel. We measure the existing opening, check whether the vertical channels and header are still square, and order a replacement panel cut to the exact dimensions from a local fabricator. The exception is when the frame itself is corroded or out of square from clay-soil movement; then a patch job would just fail again. We’ll tell you which situation you have before quoting anything. Call (682) 708-9180 for a free measurement and written estimate.
That’s hard-water etching, common in Fort Worth, and it’s not something a cleaner can remove. The minerals actually etch the glass surface. Light hazing can often be restored with professional glass restoration; deep etching – especially with rainbow sheen or pitting – means replacement is the durable fix. We’ll bring a light, show you the surface, and give you both options with real prices. Call (682) 708-9180 and we’ll schedule the assessment.
If the sweep failed recently and the track just has surface corrosion, we’ll replace the sweep and track, re-caulk the curb, and you’re done. But if water has been wicking past that failed sweep for months, the real problem is usually the drywall and baseboard behind it, not the door itself. At that point, patching the sweep is just delaying the real repair. We’ll open the wall if you want the honest answer, then give you a written price for either path. Call (682) 708-9180 before you caulk over the problem again.
We install Mr-Glass enclosures as part of the full remodel, no separate glass company needed. That means one crew builds the curb with proper slope, installs the waterproofing, sets the tile, hangs the Mr-Glass enclosure, and finishes the caulk line. One written price for the whole job, one schedule, and one crew accountable for the finished bathroom. Call (682) 708-9180 and we’ll walk through the scope together.
Here are the honest Fort Worth price ranges for common Mr-Glass work:
| Service | Fort Worth Price Range |
|---|---|
| Bathroom Remodel with Mr-Glass Enclosure | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Frameless Glass Shower Enclosure (replacement panel + hardware) | $3,000 – $8,500 |
These are real ranges, not placeholders – your exact number depends on the panel size, the hardware line, and whether we’re fixing framing behind the glass. Call (682) 708-9180 for a written quote. Estimates are free, and the price on the quote is the price you’ll pay.
Book Your Mr-Glass Service in Fort Worth, TX
If your Mr-Glass shower door is dragging, leaking, or just not right, call us at (682) 708-9180. A live person answers, we schedule a measurement, and you get a written price before any work starts – including the Mr-Glass service, the clean-up plan, and the warranty on our work. Serving Fort Worth families with children and pets, from Park Glen to Fairmount and the neighborhoods in between.
Written by Graham Stein, Owner at Elmstead Remodeling Fort Worth, serving Fort Worth since 2005.
