Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Driveway & Pavers: The Fort Worth Owner’s Guide
If your Tamko driveway or paver surface is showing cracks, shifting, or drainage problems, we stock and install Tamko-compatible driveway and paver materials across Fort Worth, with most full replacements running between $7,000 and $18,000 depending on square footage and site prep. We can typically assess the damage within a couple of days and have a written price in your hands before any work begins. Most owners discover the failure the same way: a paver that’s sunk an inch after heavy rain, a corner that’s crumbled under tire pressure, or a driveway that’s begun holding water where it used to shed it clean.
Elmstead Remodeling Fort Worth is an independent service provider, not affiliated with Tamko. We work with Tamko paver systems because they’re built for the freeze-thaw cycles and clay soil movement that Fort Worth driveways endure, but when a part fails, the fix depends on matching the right replacement to the original installation.
Which Tamko Models This Applies To
Tamko’s paving line includes their Asphalt Sealcoat, Paver Base Panels, and their residential paver series distributed through roofing and hardscape supply yards in North Texas. The compatibility gotcha most Fort Worth owners run into is this: Tamko paver base panels are dimensional, and mixing panel thicknesses on a single driveway creates a seam that will telegraph through the finished surface within two seasons. If your original install used 1-inch panels, the replacement needs to be 1-inch panels, not whatever’s on the shelf at the supply yard that week.
We match Tamko pavers by measuring the actual unit dimensions with a caliper, not by eyeballing the color. A 4×8 paver that’s drifted a quarter-inch in manufacturing will leave visible grout lines that don’t align. For OEM versus aftermarket, we’re straightforward with Fort Worth customers: Tamko’s own pavers are worth the premium on driveways that carry heavy vehicles, because their compressive strength spec holds up to North Texas clay that expands and contracts by as much as two inches between wet and dry seasons. On patios or walkways that only see foot traffic, a quality aftermarket paver with matching dimensions performs just as well and often saves 15 to 20 percent on materials.
Styles & brands we work with
Signs Your Tamko Driveway & Pavers Is Failing
- Settled or sunken pavers along the driveway edge. This usually means the paver base has washed out underneath from poor drainage or a clogged weep hole. The paver itself is fine; the base failed first, and replacing the paver without fixing the base just buys you six months.
- Hairline cracks running across multiple pavers in a straight line. That’s a base panel seam telegraphing through, which tells us the original panels shifted or were never properly interlocked. In Fort Worth, this accelerates after the first freeze-thaw cycle because water gets into the seam and expands.
- Standing water that lingers more than an hour after rain. Driveways should shed water within minutes. Pooling means the slope has flattened, often from base erosion, and that water is now working its way under the pavers every time it rains.
- Crumbling edges on individual pavers. This shows up where tires consistently track the same line, especially on driveways where the pavers were cut to fit a curve. A paver cut to less than a third of its full width loses most of its load-bearing strength.
- Color fading that’s uneven, with some pavers looking chalky while others hold their tone. That’s usually a sealant failure on specific pavers, not a manufacturing defect, and it’s the earliest warning that the surface protection is compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Worth, a full paver driveway replacement typically falls between $7,000 and $18,000, with paver patio installation running $3,500 to $11,000 and driveway sealing between $250 and $700. What drives the range is mostly square footage, access to the site, and how much of the existing base can be salvaged. If the base is solid, we re-set the pavers and the job lands on the lower end. If we’re digging out failed base and hauling it away, the price rises accordingly.
Every quote includes the Tamko-matched materials, base repair, paver re-setting, edge restraint, and a photo of the clean-up before we leave. The price we hand you in writing is the price you pay: no change orders because the crew found a surprise, no added disposal fees at the end. Graham Stein writes every scope of work down before a single tool comes off the truck, and the written price and the final invoice should read the same – if they don’t, that’s on us to explain before we hand you a pen.
DIY or Call Us?
There are things worth checking on your own before you pick up the phone. Walk the driveway after a rain and mark where water pools with a piece of chalk. Check your downspouts to confirm they’re not dumping water directly onto the pavers. If a single paver has popped loose and the base underneath is still firm, you can often re-set it with polymeric sand and a rubber mallet.
What we’d caution against is pulling up more than one or two pavers to “take a look.” Once you break the interlock on a paver system, the whole section loses its lateral stability, and a driveway that was repairable becomes a full re-set. The same goes for any base excavation in Fort Worth clay. That soil moves, and a homeowner with a shovel can create a low spot that wasn’t there before. If you’re in the Fairmount Historic District or anywhere in Fort Worth with an older home, we’re happy to come out, assess what’s actually failing, and tell you honestly if it’s a $300 fix or a full replacement. Call (682) 708-9180 and we’ll schedule a time to look at it.
FAQs
With proper base preparation and drainage, Tamko pavers in Fort Worth typically last 20 to 30 years before the surface needs serious attention, though sealant should be reapplied every 2 to 4 years. The base underneath usually determines longevity more than the pavers themselves, which is why we spend as much time on drainage as we do on the surface. Call (682) 708-9180 for an exact assessment of your driveway’s condition.
Yes, if the failure is isolated to one or two pavers and the base underneath is still stable, a spot repair is usually under $400 including the matching paver and polymeric sand. If the base has eroded or shifted, replacing individual pavers won’t hold, and you’ll end up paying twice. Call (682) 708-9180 and we’ll tell you which situation you have.
A spot repair on a few pavers usually takes half a day, while a full driveway replacement in Fort Worth typically runs 3 to 5 days depending on square footage and how much base work is required. We schedule noisy demo work outside school-pickup hours when families are living in the house during the job. Call (682) 708-9180 for a timeline on your specific project.
We keep common Tamko paver dimensions and base panel sizes in stock, and for less common colors or sizes we can typically source them from our Fort Worth supply partners within 3 to 5 business days. We also stock compatible products for KraftMaid, Cambria, and Silestone surfaces, so if your project touches more than one system, we can handle it without sending you to multiple contractors. Call (682) 708-9180 and we’ll confirm we have your size on hand.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
