Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Fort Worth Owner’s Guide
A full CGI kitchen remodeling project in Fort Worth typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and how much structural work the existing kitchen needs. We stock and install CGI-compatible cabinetry, hardware, and component parts, and we can match most existing CGI kitchen setups without ripping out work that’s still holding up fine. Most Fort Worth homeowners call us after they notice a drawer front that won’t stay aligned, a soft-close hinge that slams, or cabinet boxes that have started pulling away from the wall after years of Texas humidity cycling.
Elmstead Remodeling Fort Worth is an independent remodeling contractor, not affiliated with CGI. What that means for you is simple: we work on the kitchen you already have, match what’s there, and tell you honestly whether a repair makes more sense than a replacement.
Which CGI Models This Applies To
CGI kitchen products across Fort Worth homes span several cabinet lines and hardware generations, and the compatibility issue we see most often is hinge bore spacing. Older CGI cabinet doors often use a 35mm bore with 42mm screw spacing, while newer lines shifted to a 45mm bore pattern. If you order a hinge based on brand name alone without measuring the bore, you’ll get a door that hangs crooked or won’t close. We measure before we order, every time.
The fastest way to identify what you have: open a cabinet door and look for a label on the hinge cup or the inside of the cabinet box. Most CGI lines print the series name there, along with a date code. If the label is gone, we work from hinge pattern, drawer slide type, and door profile. For OEM versus aftermarket on CGI specifically, the OEM hinges and slides carry better metal gauge and spring retention over time, and we default to OEM where the line is still available. For discontinued CGI lines, we source quality aftermarket equivalents from the same manufacturers that supplied CGI originally, then we test one door before ordering the full run. We also carry parts for KraftMaid, Cambria, and Silestone, which matters if your Fort Worth kitchen is a mix of brands.
Styles & brands we work with
Signs Your CGI Kitchen Remodeling Is Failing
Here’s what we see on service calls across Fort Worth, from Fairmount bungalows to newer builds out toward Benbrook:
- Drawer fronts that sag or scrape the face frame. The drawer slide has lost its ball bearing retention, usually from years of kids leaning on an open drawer. The fix is a slide replacement, not a drawer replacement, in most cases.
- Soft-close doors that slam like a regular hinge. The damper piston inside the hinge cup has failed. On CGI hinges this is a wear item, and Texas heat accelerates it when the kitchen gets direct afternoon sun.
- Cabinet boxes separating at the corner joints. Fort Worth’s humidity swings between summer and winter cause wood and MDF to expand and contract. If the original cabinet was installed with the wrong fastener or no corner blocking, the joints eventually fail. This needs a pro to reset and re-secure, not a glob of wood glue.
- Doors that hang crooked no matter how many times you adjust the hinge screws. The hinge plate itself has warped, or the door has absorbed enough moisture that the screw holes are stripped. We see this chronically on exterior-adjacent cabinets in older Fort Worth kitchens.
- Finish flaking or bubbling at the bottom edges of door fronts. Usually steam from a dishwasher or pot filler saturating the edge banding. Once the MDF core swells, the door is done. We can match a replacement door front from CGI-compatible lines or refinish if the swelling hasn’t gone deep.
Replacement Cost & What’s Included
For Fort Worth homeowners, a targeted CGI kitchen repair or partial replacement lands between $4,000 and $13,000 when we’re replacing a run of cabinets or all door fronts and hardware. A full kitchen remodel with CGI-compatible cabinets, new countertops, and backsplash goes from $14,000 to $45,000. Here’s how the pieces break down:
- Cabinet installation (new boxes): $4,000 – $13,000 depending on linear feet and cabinet grade
- Countertop installation (Silestone, Cambria, or Caesarstone): $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
- Cabinet hardware and hinge replacement (full kitchen): $800 – $2,500 including labor
Every quote from Elmstead Remodeling Fort Worth includes a written price before any work starts. That price covers the parts, the labor, the haul-away, and the clean-up. If something changes once we open a wall or pull a cabinet, we tell you and we re-scope in writing before we touch it. The 365-Day Done Right Promise applies to every kitchen project we complete in Fort Worth: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things are safe to check on your own: measuring hinge bore spacing, reading the label inside the cabinet box, and taking photos of the drawer slide type. Those steps help you know what you’re dealing with, and they help us give you a faster answer on the phone. But pulling a full cabinet box off the wall, resetting corner joints, or re-hanging doors on a run that’s out of square is not a weekend job. The risk with a bad cabinet reset is the whole run pulling free of the wall, and that’s a drywall, plumbing, and countertop repair you do not want to create for yourself. If the cabinet is holding weight or attached to a countertop with a sink in it, call us. Graham Stein and the crew answer at (682) 708-9180, and we’ll tell you whether it’s a one-visit fix or a bigger conversation.
FAQs
With proper installation and reasonable care, CGI kitchen cabinets in Fort Worth last 15 to 25 years. The hinge dampers and drawer slides are the first things to wear, usually between years 7 and 12, but the cabinet boxes themselves hold up well if they were installed with the right fasteners and corner blocking. Call (682) 708-9180 and we can assess what’s wearing and what’s still solid.
Yes, in most cases a single hinge or drawer slide can be repaired or swapped without touching the rest of the kitchen. We stock common CGI hinge patterns on the truck and can match discontinued parts within a few days. Call (682) 708-9180 with a photo of the failed part and we’ll tell you what we can do.
A hardware-only hinge or slide swap across a full kitchen usually takes one day. Replacing a run of cabinet boxes takes two to four days depending on countertop scope. We schedule noisy work outside school-pickup hours when a family is living in the house, and we lay drop cloths and wear shoe covers on every visit. Call (682) 708-9180 to get a written timeline for your specific kitchen.
We stock the most common CGI hinge patterns, soft-close dampers, and drawer slides on the truck. For less common or discontinued CGI parts, we order directly through our supplier network and can usually have them in hand within a week. If we’re doing a bigger replacement, we confirm the exact match before placing the order, so you’re not paying for the wrong part twice.
Get a Written Price Before Any Work Starts
If your CGI kitchen in Fort Worth is showing signs of wear, call Elmstead Remodeling Fort Worth at (682) 708-9180. We’ll walk through what’s failing, what can be repaired, and what the full replacement cost looks like. Every estimate is written, free, and specific to your kitchen. Graham Stein writes the scope down before a single tool comes off the truck, because the written price and the final invoice should read the same.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
