Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Fence Installation: The Fort Worth Owner’s Guide
Jerith fence installation in Fort Worth typically runs $3,500 to $9,000 for a full residential aluminum fence, with most standard backyard jobs landing between $4,200 and $6,800 depending on linear footage, gate count, and whether we’re pulling old posts or setting new ones. We install Jerith aluminum fencing and match replacement sections, posts, gates, and hardware to existing Jerith systems across Fort Worth neighborhoods including Fairmount, Arlington Heights, Tanglewood, and the Cultural District. Most owners discover they need us when a gate sags hard enough to drag, a post leans after a spring storm, or the latch no longer catches because the hinge side settled. The good news: Jerith uses a modular aluminum system that’s often more straightforward to correct than welded steel or wood, and with a written price before we touch a single post hole, you’ll know the full cost up front.
Elmstead Remodeling Fort Worth is an independent service provider. We’re not affiliated with Jerith, but our crews work with their aluminum fencing systems regularly and we keep common Jerith-compatible posts, gate hinges, latches, and pickets on the truck so smaller repairs can happen in a single visit. Graham Stein, who leads our Fort Worth team, writes every scope down before a single tool comes off the truck, and that habit carries straight into fence work: measurements, post counts, gate hardware, and a line-item price.
Which Jerith Models This Applies To
Jerith manufactures aluminum residential and light commercial fencing in a few distinct series, and the installation approach changes depending on which one you have. The most common lines we see in Fort Worth are the Jerith Residential Aluminum series, including their 4-foot and 5-foot styles with spear-top or flat-top picket options, along with their pool-code fencing that meets Texas barrier requirements. Older Fort Worth homes sometimes still carry Jerith’s Legacy or Garden series, which were popular in the 1990s and early 2000s and used slightly different post dimensions.
The fastest way to identify what you have: look for a small white or silver tag on the inside of a gate post or near the bottom rail. It will show the model name and sometimes the powder-coat color code. If the tag is faded or missing, measure the picket width and the distance between pickets. Jerith pickets are typically 5/8″ to 7/8″ wide depending on the series, and posts run 2″ to 2.5″ square. That measurement matters because a gate hinge sized for a 2″ post won’t sit right on a 2.5″ one. On the OEM-versus-aftermarket question, we’ve found that Jerith’s own gate hardware wears longer than most generic self-closing hinges you’ll find at big-box stores, particularly in Texas heat, so we quote OEM first and only recommend aftermarket when a Jerith part is backordered and the family needs the gate working now.
Styles & brands we work with
Signs Your Jerith Fence Installation Is Failing
- Sagging gate that scrapes the ground or won’t close fully. This is usually a worn or bent top hinge pin, plus sometimes a gate frame that has twisted slightly out of square. Jerith gates are aluminum, so the frame itself rarely rots; the hinge hardware takes the abuse and gives out first.
- Post leaning after rain or wind. In Fort Worth’s clay-heavy soil, posts shift when the ground goes through wet-dry cycles. The post itself is usually fine; the concrete footing wasn’t deep enough or wide enough for our soil, and it needs a re-set at proper depth.
- Latch that catches sometimes, not always. This points to the gate sagging a half-inch out of alignment, which puts the latch bar at the wrong height. Tightening the hinge usually fixes it, but if the latch itself is bent, replacement is the honest answer.
- Pickets rattling in the rails or showing scratches with white oxidation. Jerith pickets sit in punched rails, and the retaining clips or screws loosen over time. Surface scratches on the powder coat can oxidize in Texas humidity and turn chalky white, which is cosmetic but worth addressing before it spreads.
- Gate self-closer no longer pulls the gate shut. The spring inside the self-closing hinge loses tension after years of Texas sun and use. Jerith’s tension-adjustable hinges can sometimes be re-tensioned; once the spring is cooked, the hinge gets swapped.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Worth, full Jerith fence installation runs $3,500 to $9,000. A 60-foot run with one walk gate typically lands around $4,500 to $6,000. Adding a double drive gate pushes the upper end. Smaller repair work, like a hinge replacement or a single post reset, often falls between $150 and $500 depending on what’s worn.
What your written price includes, every time: removal and disposal of the old fence section if needed, concrete and labor for any new post footings, the Jerith or Jerith-compatible materials themselves, gate hardware, and clean-up. Shoe covers and drop cloths are part of how we work; if we need to walk through the house to reach your back gate, we’ll put them down without being asked. You’ll get a photo of the cleaned work area before the crew leaves. No estimate that grows after the crew arrives, no surprise line on the invoice. Our 365-Day Done Right Promise covers the work; if a gate sags or a post shifts in the first year, we come back and make it right.
DIY or Call Us?
Jerith aluminum fencing is one of the more owner-friendly systems to inspect. You can safely check for loose hinge screws, pickets that have slipped out of their rail slots, and latch misalignment without special tools. A 5/32″ hex key will tighten most Jerith hinge screws, and you can watch how the gate moves to figure out whether the top or bottom hinge is the problem.
Where DIY goes wrong: post removal and re-setting. Getting an old concrete plug out of Fort Worth clay without the right tools is a full Saturday and a sore back, and setting a new post too shallow means the same lean comes back after the next big rain. Gate welding is off the table for us too; aluminum that thin needs a specific touch, and a bad weld looks worse than the damage it’s meant to fix. If a hinge replacement or a picket reset is within your comfort zone, we will happily sell you the part and point you in the right direction. If a post is leaning or a gate won’t stay shut, call us at (682) 708-9180 and we’ll put a written estimate in front of you before any work starts.
FAQs
A properly installed Jerith fence should last 30 years or more in Fort Worth, and the aluminum itself won’t rust the way steel does. The components that wear first are the gate hinges, latches, and self-closers, which typically need attention every 5 to 10 years depending on use and sun exposure. Call (682) 708-9180 if your gate hardware is starting to feel loose or noisy; we can often replace hinges before a gate starts dragging.
Yes, in most cases a leaning Jerith post can be dug out, re-plumbed, and set in a new concrete footing without replacing the post itself. The aluminum post is usually still straight and sound; the original footing just wasn’t deep enough for Fort Worth’s shifting clay soil. Call (682) 708-9180 for an exact assessment and a written price.
A standard 60-foot Jerith fence installation with one gate takes one to two working days for our Fort Worth crew, including removal of the old fence if there is one and clean-up of the work area. Larger runs with multiple gates or a drive gate add a day. Call (682) 708-9180 and we’ll give you a timeline with your written estimate.
We stock common Jerith-compatible posts, gate hinges, latches, pickets, and tension hardware on the truck, which means smaller repairs can often be completed same-day in Fort Worth. If a specific Jerith part needs to be ordered, we’ll tell you before any work is scheduled and show you the ETA in writing. Call (682) 708-9180 and we’ll verify what we can match from your fence’s model tag.
If your Jerith fence is sagging, leaning, or the gate just won’t stay shut, call us at (682) 708-9180 for a free written estimate. We’ll measure, write the price down, and walk you through exactly what needs to happen before the first tool comes off the truck. This is the same care we bring to KraftMaid cabinet installs, Cambria countertops, and Silestone surfaces; it just happens to be keeping your fence standing straight this time.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
