Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Roofing: The Fort Worth Owner’s Guide
We stock and install ActiveYards-compatible roofing panels and trim parts for Fort Worth homeowners, with most replacement jobs running between $400 and $1,800 installed depending on panel count and accessibility. You’ll usually discover a failed part the morning after a North Texas thunderstorm, when you spot a cracked panel edge near the fascia or find a corner trim piece that pulled loose along the roofline. If you’re looking at a sagging section or daylight showing through a seam, we can match the part and have a written price to you before any work starts.
ActiveYards started as a fence company and expanded into aluminum patio covers and shade structures. Their roofing panels are roll-formed aluminum, typically 0.024 to 0.032 gauge depending on the series, with a baked enamel or PVDF coating that stands up to Fort Worth sun far better than untreated steel but still has a real-world lifespan. Around here, hail is the great equalizer. We regularly replace ActiveYards panels in Wedgwood and Arlington Heights after a spring storm has dimpled the surface or cracked a rib. The structure still works, but the panel loses its structural stiffness once the ribs deform.
Elmstead Remodeling Fort Worth is an independent service provider. We’re not affiliated with ActiveYards, which means we’ll source the OEM part when that’s the right call and tell you plainly when a quality aftermarket equivalent makes more sense for your budget.
Which ActiveYards Models This Applies To
ActiveYards has shifted its product lineup over the years, and not all parts cross between generations. The two roofing lines we see most often in Fort Worth backyards are the older aluminum pan-style panels used on their freestanding patio covers and the newer interlocking ribbed panels on their attached and freestanding pergola systems. A panel from one line will not seat into the other without modifying the tracking channel.
To identify your part, check the underside of any accessible panel near a seam or end cap. ActiveYards stamps a small alphanumeric code on many mid-run panels. If the stamp has worn off, measure the panel width face-to-face across two full ribs. The older pan-style panels typically measure 12 inches wide; the interlocking ribbed panels usually run 16 to 18 inches. That width difference decides the part before anything else does.
The OEM-vs-aftermarket question matters for this brand specifically because ActiveYards color codes are exact. The Kona brown from 2012 is not the same Kona brown sold in 2020, and an unbranded panel ordered online will often be a generic bronze that catches the light differently. When color match matters, we recommend OEM through an authorized distributor. When the homeowner is replacing a whole roof section anyway, or painting afterward, a structural aftermarket equivalent is a sensible way to reduce cost without losing performance.
Styles & brands we work with
Signs Your ActiveYards Roofing Is Failing
- Dimpled or dented panel surface. Hail impacts flatten the ribs that give the panel its stiffness. This is the most common call we get in Fort Worth after March and April storm lines move through. The panel still sheds water, but it’s lost its structural integrity.
- Visible daylight at a seam or end cap. Aluminum panels expand and contract with every temperature swing, and Fort Worth sees 40-degree shifts in a single week during spring and fall. Over years, that movement works fasteners loose and opens gaps at the joints.
- Pulled fasteners along the perimeter trim. You’ll see the grommeted screw heads standing proud of the trim piece, or the trim bowing outward. This usually means the underlying screw boss or anchor point has corroded or stripped. Loose trim is what lets the next gust of wind get under the roof edge.
- Chalky or faded coating that’s gone beyond the cosmetic. The PVDF coating on ActiveYards panels holds up well, but after 10 to 15 years of Texas sun the paint film can start to oxidize to the point where it no longer protects the aluminum. You’ll feel it as a powdery residue when you wipe a finger across it.
- Water staining on the underside or along the support beam. Once a seam opens or an end cap cracks, water follows the interior channels and shows up where it meets the beam or post. If you’re seeing staining, the leak has likely been active for longer than the stain suggests.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Our ActiveYards roofing replacement work in Fort Worth runs between $400 and $1,800 installed. On the low end, you’re usually looking at one or two panels plus a trim piece. On the high end, a full panel replacement across a large patio cover with new fasteners, seam tape, and end caps can reach the top of that range.
What drives the difference is panel count, color-match needs, and whether we’re pulling a section or the whole roof. OEM parts run higher than aftermarket equivalents, and matching an older color code takes more sourcing time. Every quote includes the parts, the labor, the sealant, the fasteners, and the clean-up afterward, as one written number. That is the only way we work. You’ll see the line items before you approve anything, and the price on the invoice is the price you approved. There’s no change order for “extra sealant” showing up at the end.
Our workmanship warranty covers the installation for one year. If a panel we replaced comes loose or a seam we sealed reopens in that window, we come back and make it right. That falls under the 365-Day Done Right Promise that governs every Elmstead project.
DIY or Call Us?
If you’re comfortable on a ladder and the failure is a visible screw or a trim piece at the roofline edge, replacing that one fastener or resetting a piece of trim is doable on a Saturday morning. The key is matching the fastener type, because ActiveYards uses grommeted screws that don’t just thread through the aluminum, they seat against a rubber washer that keeps water out. A standard screw from the hardware store will look close and leak within a year.
Where DIY goes wrong in Fort Worth is the panel pull. Once you start removing interlocking panels, the neighboring panel loses the lip that holds its own edge, and now you’ve expanded a two-panel job into a five-panel job. There is also a safe-way sequencing to it, because a loose panel in a spring gust is a 12-foot piece of aluminum at height. Our crew does this routinely and we can usually complete a standard ActiveYards roof section replacement in half a day. If you’re unsure whether your issue is a trim fix or a panel pull, call (682) 708-9180 and describe what you’re seeing. We’ll help you figure out which it is, whether or not you decide to hire us.
FAQs
Expect 12 to 18 years from ActiveYards aluminum panels in Fort Worth, with hail being the variable that shortens that lifespan faster than sun or rain. Panels under open sky without tree cover in neighborhoods like TCU-Westcliff or Tanglewood face the full force of every North Texas storm, and it’s normal to replace a few panels after a particularly rough spring.
Small punctures can be patched with color-matched sealant, and a single dented rib on an otherwise intact panel can sometimes be left alone if the water still sheets correctly. Once a panel has multiple dimpled ribs or a cracked seam, replacement is the honest fix. Call (682) 708-9180 and describe the damage; we’ll tell you which category you’re in before any work is scheduled.
Most single or double panel replacements run half a day from setup to clean-up. A full roof section on a larger patio cover might take a full day. We keep our schedules honest, and if the family is home, we’ll work around nap and school-pickup hours where we can.
We stock common fasteners, grommets, end caps, and trim pieces for the ActiveYards lines we service most, along with compatible panels in standard widths. Specific factory colors are sourced to order so you get the correct match instead of a close-enough bronze. The same goes for our other stocked parts lines: KraftMaid cabinets, Cambria countertops, and Silestone surfaces, where color and spec accuracy matter the same way.
If your ActiveYards roof has a failing panel or loose trim, call (682) 708-9180 for a free estimate. We’ll help you identify the part, price it honestly, and get you a written number before anything comes off the truck.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
