Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Kitchen Remodeling: The Fort Worth Owner’s Guide
Belgard kitchen remodeling in Fort Worth typically runs $14,000 – $45,000, depending on whether you’re replacing a few components or gutting the space to the studs. We install Belgard-compatible materials and can usually start the same week as your estimate. Most Fort Worth homeowners call us because a single piece has failed: a hairline crack across a countertop, a drawer face that no longer sits flush, or a backsplash section that has started pulling away from the wall after a few Texas summers.
This page is written for the owner who has a Belgard product in the house and needs to know whether it can be saved, what replacement costs, and who in Fort Worth actually works with these materials. We’re an independent remodeling contractor, not affiliated with Belgard, but their products show up in enough kitchens around Tarrant County that we keep compatibility specs and install details on hand.
Which Belgard Models This Applies To
Belgard’s kitchen line includes several series that have rotated through their catalog over the years, and the part you need depends on which series you have. The most common we see in Fort Worth kitchens are the older Artisan series, the mid-generation RockWork line, and the current Elements collection. Each series uses different finish codes, so a replacement drawer front from one series will not match the surface texture of another, even if the color name sounds similar.
How to identify yours: open a drawer and look for a small printed label on the inside of the box or on the underside of the countertop lip. Belgard typically stamps a five-digit series code followed by a two-letter finish designation. If the label is gone, take a photo of the surface in direct light and send it to us; the texture pattern is usually enough for our crew to identify the series on sight. For OEM parts, Belgard still stocks most replacement hardware for the Elements line, but the Artisan series has been discontinued, which means we often source quality aftermarket equivalents that match the original profile within a 1/16-inch tolerance. That’s the kind of fit-and-finish detail that matters when you’re replacing one piece rather than a whole run.
Styles & brands we work with
Signs Your Belgard Kitchen Remodeling Is Failing
- Countertop seams are spreading near the cooktop. Fort Worth’s dry summers pull moisture out of the substrate, and the repeated expansion cycle eventually breaks the seam bond. You’ll see a dark line where the two sections meet that wasn’t there a year ago.
- Soft-close drawers are slamming or sticking. The dampers Belgard uses in their soft-close tracks wear out faster in kitchens with heavy daily use. A drawer that used to glide now sounds like a car door, and the damper is almost always the culprit.
- Cabinet doors have shifted a half-inch out of alignment. This points to hinge plate fatigue. The hinge itself is fine, but the plate has drifted, and tightening it only works for a few weeks before it slips again.
- Backsplash tiles are lifting at the outside edges first. That’s a telltale sign the adhesive behind the tile has degraded. The edges go first because they get the most direct temperature swings from the oven and the window line.
- Island countertop has a dull ring above the dishwasher. Heat and steam from the dishwasher vent break down the surface sealant directly above it, leaving a clouded patch that no amount of scrubbing restores.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Belgard kitchen remodeling in Fort Worth, here’s where your money goes:
- Partial replacement (one countertop section, a cabinet face, a backsplash rebuild): $3,000 – $10,000
- Full kitchen remodel with Belgard-compatible materials: $14,000 – $45,000
- Cabinet installation only: $4,000 – $13,000
- Countertop installation only: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
The range is wide because a modest galley kitchen with a stock countertop replacement is a different job from a full Thermador-and-Belgard rebuild in a Fairmount bungalow with custom drawer boxes. Every estimate we write in Fort Worth includes parts, labor, disposal of the old material, and the written price before any work starts. If the scope changes mid-job, we stop and put the change in writing before we order anything. That’s how Graham Stein operates, and it’s non-negotiable on every project.
DIY or Call Us?
You can safely remove a drawer front, check the dampers, and photograph the labels I mentioned above. You can also clean the cabinet boxes and tighten hinge screws. That’s it. Countertop seam repair, cabinet realignment, and any electrical or plumbing-adjacent work inside a kitchen wall should be handled by someone who does it every day. A countertop that shifts during removal can crack a cabinet box or a tile floor, and a mismatched seam filler looks worse than the crack you started with.
If what you’re dealing with is cosmetic and you want a second opinion before spending anything, call us at (682) 708-9180 and describe what you’re seeing. We’ll tell you over the phone whether it’s a repair or a replacement, and what it should cost in Fort Worth. No charge for that conversation.
FAQs
Countertops typically last 15 – 20 years with normal use, but Fort Worth’s dry summers and winter temperature swings shorten that to 12 – 15 years before visible seam or finish degradation. Cabinet hardware like dampers and hinges fails faster, usually in the 5 – 8 year range. Call (682) 708-9180 if you want an on-site assessment of what’s failing and what’s still fine.
Yes, if the crack is hairline and hasn’t traveled through the substrate. We can color-match fill and reseal a single seam for a few hundred dollars. If the crack runs edge-to-edge or the material has separated, replacement of that section is the honest fix. Send us a photo at (682) 708-9180 and we can usually tell you which path applies.
A partial replacement runs 2 – 4 days on site. A full kitchen remodel runs 3 – 6 weeks, depending on custom cabinet lead times and whether we’re moving plumbing or electrical. We schedule noisy demolition outside school-pickup hours whenever the family is living in the house, and we protect floors with drop cloths and shoe covers on every visit.
We keep common replacement hardware, dampers, hinges, and finish-matched fillers on the truck for the Belgard series we see most often in Fort Worth. For discontinued series, we source aftermarket equivalents that match the original profile. We’ll confirm availability before your estimate.
If you have a Belgard kitchen that needs attention, call (682) 708-9180 for a free estimate. We’ll walk the kitchen with you, write the price down before any work starts, and leave your home cleaner than we found it. That’s the Cedarwell Care Promise, and it applies to every project we do in Fort Worth.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
