Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Home Additions & ADU: The Fort Worth Owner’s Guide
If you’re planning a home addition or ADU in Fort Worth and want Tremron pavers, retaining wall block, or site hardscape tied into the new structure, we handle the full build and the Tremron-specific material work. A complete home addition in Fort Worth typically runs $45,000 – $130,000, while a detached ADU lands between $90,000 – $220,000 depending on size, foundation work, and utility runs. Most owners discover a problem when the Tremron block or paver portion of an existing addition starts shifting, cracking, or pulling away from the foundation line after a hard Texas rain season.
What we see most often isn’t the Tremron product failing on its own. It’s the base prep underneath. Fort Worth’s clay soil expands and contracts through wet and dry cycles, and when a prior crew skimped on the gravel base or edge restraint, the pavers above it telegraph every bit of that movement. The block itself is usually fine. The installation underneath is the problem. That distinction matters, because it changes what a repair costs and whether anything needs to be torn out at all.
We’re an independent Fort Worth remodeling contractor, not a Tremron dealer or affiliate. But we specify Tremron products on additions and ADUs in this area regularly, and we know how they perform on North Texas soil better than most, because we’ve been called out to fix the ones that were installed wrong by someone else.
Key Takeaways:
- Home additions with Tremron hardscape run $45,000 – $130,000; ADUs run $90,000 – $220,000 in Fort Worth.
- Most Tremron failures in this area trace back to base prep, not the block or paver itself.
- We write a fixed price before any work starts, and the 365-Day Done Right Promise covers it after we leave.
- Graham Stein, our owner, walks every Tremron-related addition site personally before quoting.
Which Tremron Models This Applies To
Tremron manufactures a broad range of concrete pavers, retaining wall systems, and site block used in North Texas landscaping and hardscape. For home additions and ADUs in Fort Worth, the products we most often tie into foundation lines, walkways, and outdoor living areas are the Tremron retaining wall systems (think Stonegate, Dublin, and the larger estate block lines), plus their standard 60mm paver series for patios and walkways. Sizes vary by line, but most Tremron pavers on residential jobs run 60mm thick, while driveway-rated pavers come in at 80mm. That thickness spec matters: a 60mm paver laid on a poorly compacted base will fail years before an 80mm paver on the same soil, simply because it flexes more.
If you’re trying to identify what’s already on your property, look at the edge of a loose paver or block. Tremron products are stamped on the underside with a product code in many cases, though older installations may have worn smooth. Measure the paver thickness first. If it’s under 60mm, it was never rated for the load you’re putting on it, and that’s worth knowing before you add a second story or a heavier patio structure on top of an existing hardscape.
For the OEM-vs-aftermarket question on Tremron specifically: we almost always recommend using genuine Tremron product when matching existing work. Color blends, especially the weathered and tumbled lines, vary slightly from batch to batch, and an aftermarket block that’s “close enough” will read as a patch job for the life of the addition. The cost difference on a partial repair is small enough that the visual mismatch isn’t worth what you save.
Styles & brands we work with
Signs Your Tremron Home Additions & ADU Is Failing
- Pavers sinking or dipping near the foundation line. This almost always means the gravel base has washed out or settled unevenly underneath. In Fort Worth’s clay-heavy soil, water from roof runoff finds its way under the edge and creates soft pockets that pull the pavers down with every wet season.
- Retaining wall block leaning outward at the top. Retaining walls push outward when drainage behind the wall isn’t doing its job. Waterlogged soil weighs dramatically more than dry soil, and a wall that was fine for five years can start leaning noticeably after two unusually wet springs in a row.
- Gaps opening between pavers that used to sit tight. This points to edge restraint failure. When the plastic or concrete edge isn’t holding, the entire field of pavers creeps outward slowly, and you’ll see the outer rows separating from the inner ones.
- Cracks running through multiple pavers in a straight line. A single cracked paver is a defect or impact. A line of cracked pavers means the base underneath has cracked or settled along a seam, and the pavers are flexing over that break point every time weight rolls over it.
- Water pooling against the addition’s exterior wall or paver edge. If the hardscape was pitched wrong from the start, water sits against the house instead of running off. Over months, that water works into the foundation line and creates movement that shows up as paver shift along the wall.
Replacement Cost & What’s Included
When the Tremron hardscape tied to a home addition needs repair or replacement, Fort Worth pricing breaks down by the scope of what’s actually wrong. A paver patio re-level tied into a larger addition project commonly falls between $3,500 – $11,000 depending on square footage and whether the base needs recompaction or full rebuild. If the repair is isolated to removing and relaying a section of pavers against the foundation, you’re looking at the lower end of that range. If we’re pulling up the entire field, rebuilding the base from gravel up, and setting new edge restraint, it climbs toward the top.
For the full structure, a home addition runs $45,000 – $130,000 in this market. A detached ADU runs $90,000 – $220,000. Those numbers include the Tremron hardscape portions only when the hardscape is part of the project scope, so we’ll break out line items clearly: structure, mechanical, hardscape, and finishes. You’ll see the Tremron line as its own number, not buried in a lump sum. The written price you get before work starts is the price on the final invoice, unless you change the scope, in which case we put the change on paper before any additional work happens.
Every Tremron-related project we do in Fort Worth is covered by the 365-Day Done Right Promise. If the block shifts, the pavers settle, or the edge restraint fails within a year of completion, we come back and make it right. No fight, no re-quote.
DIY or Call Us?
A homeowner can safely replace a single cracked paver if they have the matching product and it’s just sitting loose. Lift it out, check the sand bed underneath, set the new one in, and tap it level. That’s hand work, and it’s fine to do on a Saturday.
What goes wrong for most people is treating a paver or wall problem as a simple swap when the real issue is underneath. If you pull up ten pavers and find the base has washed out into mud, you now have a compaction problem, a drainage problem, and a load-bearing question, all layered together. That needs a plate compactor, proper gravel, and someone who knows how Fort Worth clay responds to wet-and-dry cycles. We also see homeowners add a small paver patio against an addition’s foundation and accidentally pitch the whole surface toward the house, creating the exact water problem they were trying to avoid. If the failure is at the foundation line or involves a retaining wall holding back more than a foot of soil, call us at (682) 708-9180 before you move anything. We’ll walk the site and tell you honestly what’s a repair and what’s a rebuild.
See the difference
Before
After
Before
After
Before
AfterHow much does it cost to replace a failing Tremron paver base in Fort Worth?
Rebuilding the base under an existing Tremron paver area in Fort Worth typically costs $3,500 – $11,000 depending on square footage, base depth, and whether we need to correct drainage pitch at the same time. The range is wide because some jobs are a few hundred square feet against a house wall, while others wrap a full backyard living space. Call (682) 708-9180 and we’ll give you a written number specific to what’s on your property.
Can a leaning Tremron retaining wall be repaired, or does it need to be rebuilt?
A leaning Tremron wall can sometimes be repaired if the block is intact and only the top courses have shifted, but a wall leaning more than a few degrees usually has a drainage or base failure that requires pulling it down and rebuilding properly behind the block. The honest answer depends on what we find when we pull the first course. Schedule a walk-through and we’ll tell you before you spend a dollar.
How long does a Tremron paver or wall repair take?
A paver base rebuild on a typical Fort Worth addition project takes two to five working days, including the time for the compacted base to be re-laid and the pavers reset and sanded. Retaining wall rebuilds run longer, often five to ten working days depending on wall height and what’s behind it. We schedule noisy work outside school-pickup hours when your family is home during construction.
Do you stock Tremron pavers and block, or do we order them?
We order Tremron product directly from the manufacturer for every project, so it arrives fresh from a single batch and the color matches across the entire job. We also work with KraftMaid, Cambria, and Silestone on the interior side of additions and ADUs, but the exterior hardscape always gets Tremron when Tremron is what’s already there. We don’t hold a warehouse of material in Fort Worth, which means you get current product, not block that’s been sitting in a yard through two summers.
If your Tremron hardscape is shifting, pulling away, or holding water against your addition, call (682) 708-9180 for a free estimate. Graham Stein walks every site personally, writes the scope down before a tool comes off the truck, and stands behind the work with the 365-Day Done Right Promise. The written price and the final invoice should read the same. If they don’t, that’s on us to explain before we hand you a pen.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
