Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Driveway & Pavers: The Fort Worth Owner’s Guide
We install and service Techo-Bloc driveway pavers and paver systems throughout Fort Worth, with typical driveway paver installation running $7,000 – $18,000 depending on square footage, base prep, and pattern. Most owners call us after a freeze-thaw cycle leaves a paver sunken, after a vehicle load cracks a section, or after years of Fort Worth clay soil shift a row out of alignment. The good news: Techo-Bloc parts and matching pavers are available locally, and we can usually source, match, and install what you need without replacing the whole driveway.
Here’s the longer answer. A driveway that started failing usually shows it in one of three ways: a low spot where water pools after rain, a cracked or chipped paver along the tire path, or a joint that’s opened up wide enough to grow weeds. Sometimes it’s a single paver that’s spalled on the surface. Sometimes the edge restraint has let go and the whole border is drifting into the lawn. None of these mean the Techo-Bloc product itself failed. In our experience across North Texas, the failure is almost always in what’s underneath: the base, the bedding layer, or the edge restraint. That matters, because fixing the cause costs less than redoing the whole driveway and keeps the same problem from coming back in two years.
Which Techo-Bloc Models This Applies To
Techo-Bloc makes several paver lines that show up constantly on Fort Worth driveways: Blu 60 (the big-format slab, often 60mm for driveways), Blu 80 (the heavier paver rated for vehicle traffic), Villagio and Mista (tumbled-look pavers often used on patios but sometimes on residential driveways), and Industria (a modern, sleeker slab). If you don’t know which line you have, flip over a loose paver or check the paperwork from the original install. The product name is often printed on the underside or on the delivery slip. If the paver is still set, you can often identify it by the surface texture and the paver dimensions among the patterns above.
One compatibility gotcha worth knowing: Techo-Bloc changes dye lots and, on some lines, subtle paver dimensions between production runs. A paver that looks identical on a website photo can be a shade off or a millimeter different from pavers made two years ago. For that reason, when we repair a section, we pull a sample of the existing paver and match it physically before the crew arrives. If it’s a current line, we order from the same series. If it’s been discontinued, we work with local Fort Worth Techo-Bloc distributors to find run-out stock, or we recommend a close-match paver from a line that can be blended honestly. We’re an independent Fort Worth contractor, not a Techo-Bloc dealer, so our interest is in matching exactly, not selling you a whole pallet anyone could have sold you.
We also work with other manufacturer parts and materials on regular remodels and repairs, including KraftMaid, Cambria, and Silestone, so if a paver repair reveals a larger hardscape issue, the same written-price process applies.
Styles & brands we work with
Signs Your Techo-Bloc Driveway & Pavers Is Failing
- Pooling water that sits for more than an hour after rain. This usually means a low spot under the paver, often from fine base material washing out or settling. In Fort Worth’s clay soils, it often gets worse after the dry-wet cycles we get every spring and fall.
- A paver that rocks or clicks when you step on it. That’s the bedding layer compressing under the paver or the sand jointing being long gone. Left alone, the rocking cracks the paver edges.
- Cracks running across multiple pavers in a line. A crack that crosses several units usually points to a base problem, not a single bad paver. Often it’s a spot where the gravel base wasn’t deep enough for the clay beneath it.
- Weeds pushing up through joints in oddly straight lines. This often means the sand jointing has failed and water is now moving freely under the pavers. It’s not a weed problem, it’s a drainage and jointing problem.
- An edge row that’s spreading into the lawn. Edge restraint failure. We see this on Fort Worth driveways where the original plastic edging was spiked into soil instead of set in concrete, and the freeze-thaw cycles finally worked it loose.
If any of these match what you’re seeing, the fix is usually local: relevel a section, replace a few pavers, repair the edge, re-sand the joints. Full driveway replacement is almost never the first move.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Techo-Bloc driveway paver work in Fort Worth, here’s what written pricing looks like on real projects:
- Spot repair (2 – 20 pavers, relevel, re-sand): $350 – $2,500, depending on access and whether base material needs to be added.
- Section repair (a low spot or edge failure, roughly 50 – 150 sq ft): $2,000 – $5,500, including base repair, new edge restraint, matching pavers, and jointing sand.
- Full paver driveway installation (Techo-Bloc or comparable): $7,000 – $18,000, driven by square footage, base depth, pattern complexity, and whether the old driveway must be demoed and hauled.
What’s included in every Elmstead Remodeling Fort Worth number: the specific pavers and base materials, labor, haul-off if needed, and the written price before any work starts. We write the scope down, line by line, before a single tool comes off the truck. If the job changes because we uncover something unexpected once pavers are lifted, we explain it and get your signature before doing more. The written price and the final invoice should read the same. If they don’t, that’s on us to explain before we hand you a pen. And every completed hardscape repair or install falls under our 365-Day Done Right Promise: if it’s not done right after the job is complete, we make it right.
DIY or Call Us?
Pavers are one of the safer hardscape projects to inspect yourself. You can walk the driveway, mark low spots with chalk after a rain, check for rocking pavers, and look at whether the edges are holding. That’s all safe and useful to know before you call. What gets risky is lifting pavers without understanding the base. If you pull up a section and the base underneath is shot, you now have an open area that can wash out in the next north Texas downpour, and a partial repair can leave a visible patch that doesn’t match. If the area in question is on a slope, carries vehicle load, or has drains or utilities running under it, call us first. The same goes for any large paver or heavy section. We’d rather answer your call before the shovel comes out than fix a bigger problem after.
If you want to know what you’re dealing with, call (682) 708-9180 and describe what you’re seeing. We talk through the likely cause on the phone and set up a time to walk it with you. The estimate is free.
FAQs
Done correctly, with a proper base and edge restraint, a Techo-Bloc paver driveway in Fort Worth typically lasts 25 to 40 years before the pavers themselves wear out. The base, if it was done right, can outlast the pavers. What fails earlier is usually the work around the pavers: edge restraint, jointing sand, or a base that was never deep enough for our clay. If the original install was done well, most repairs we get called for are minor, local, and infrequent. Call (682) 708-9180 if you want us to walk your driveway and tell you honestly whether a repair or a redo is the right call.
A cracked paver cannot be meaningfully glued or patched in place and look right. The usual repair is to lift the cracked unit, set a matched replacement, and re-sand the joints. Where matching isn’t possible because a dye lot is gone, we sometimes rotate a paver from a less visible edge into the visible spot and put the close-match in the less visible location. Call (682) 708-9180 and we’ll tell you over the phone whether your paver line still has matching stock available.
Most spot repairs and section repairs are done in one day for the physical work, though we sometimes ask for a second visit to compact and re-sand joints after the base has had a day to settle. A full driveway installation typically runs 3 to 7 working days depending on square footage, access, and weather. We schedule noisy work outside school-pickup hours where possible and keep drop cloths and traffic paths clean while we work, because the drive is still your home’s front door while we’re on it.
We don’t carry full pallets of Techo-Bloc stock on our trucks, because matching dye lots and series matters more than having whatever is available. What we do carry is the tooling and jointing materials to remove, relevel, and reset pavers properly. When we know your paver line and size, we source matching stock from Fort Worth distributors, often the same week. For discontinued lines, we search the local run-out stock before recommending a close-match alternative. If you want to know what you have before we arrive, email us a photo of the paver and we’ll start identifying it by phone: (682) 708-9180.
If your Techo-Bloc driveway has a sunken section, a cracked paver, or an edge that’s drifting, call Elmstead Remodeling Fort Worth at (682) 708-9180. We’ll send someone who can identify the paver line, explain what’s actually failing, and give you a written price before any work starts. The estimate is free, and the price you see is the price you’ll sign.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
