Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose Belgard Construction
We provide Belgard service in Fort Worth, from paver driveways in Wedgwood to retaining walls near the Cultural District. Our crews have completed over 600 Belgard paver and retaining wall projects in Tarrant County, and we service every current Belgard paver line, including the Catalina, Mega-Arbel, and Dublin Cobble series. We are not authorized by or affiliated with Belgard. We are an independent remodeling contractor that installs and repairs their products daily, and that independence means we tell you the truth about what holds up in North Texas clay and what does not.
If your Belgard driveway is spreading, your patio is settling, or your Weston Stone wall is leaning, call (682) 708-9180 for a written price before any work starts.
Why Trust Elmstead Remodeling Fort Worth for Your Belgard Construction?
Belgard hardscape work fails for predictable reasons in Arlington and Fort Worth: weak edge restraint, under-compacted base, and water that never gets a path out. Our crews have rebuilt enough of these systems to recognize the failure before it becomes a full teardown, and we carry local stock of replacement Belgard units and matching paver colors in Fort Worth so repairs do not stall while parts ship from a distributor.
Graham Stein, our owner, learned the trade at Los Angeles Trade-Technical College and has spent decades doing construction across North Texas. He writes every scope of work down before a single tool comes off the truck, and he is the reason our Belgard projects get a written price up front, every time. The crew follows the same standard: shoe covers at the door, drop cloths where we walk, and a photo of the clean-up before we leave.
We install genuine Belgard pavers and wall block. Off-brand replacements look wrong because color blends and dimensions vary between manufacturers, and even between Belgard production runs. When we repair a settled area, we address the base and edge restraint, not just the surface. That is the difference between a patch that lasts two seasons and a repair that stays flat for years.
Styles & brands we work with
Common Belgard Construction Problems We Fix in Fort Worth
- Edge restraint failure on Belgard paver driveways and patios. Plastic or thin steel edging shifts in North Texas expansive clay. Once the edge lets go, the outside rows migrate outward, joints open, and the whole field loses its lock. We see this on Mega-Arbel driveways in Fort Worth where the original installer used residential-grade plastic edging. The fix requires pulling the perimeter rows, installing commercial-grade aluminum restraint with proper spikes, and recompacting the bedding layer before resetting the pavers.
- Base settlement and rutting under paver driveways. Fort Worth’s shrink-swell clay does not forgive a thin road base. When a driveway was built over 2 or 3 inches of uncompacted base, wheel loads create ruts within the first few years. The pavers above may look fine while the surface sinks. We rebuild these by removing the affected area, recompacting and grading a proper 6-inch road base, and resetting the pavers on fresh bedding sand.
- Polymeric sand joint loss and weed or ant intrusion. Along Fort Worth pool decks and shaded patios, constant moisture breaks down the joint sand faster than expected. Weeds root in the gaps, ants tunnel through, and the pavers start shifting independently. We re-sand with a polymeric product matched to Belgard’s installation standards and recompact the field so the joints stay locked through the next wet season.
- Face chipping and color fade on older Belgard units. A pressure washer set too high, or the wrong cleaning chemical, erodes the paver face and dulls the color. We see this on Catalina patios where the homeowner cleaned with a 3,000 PSI nozzle at point-blank range. The surface can sometimes be restored with re-sanding and sealing, but deeper damage requires replacing individual units from our local Fort Worth stock.
- Retaining wall lean and course slippage in Weston Stone walls. A Belgard Weston Stone wall installed without geogrid reinforcement or drainage behind the block will lean within a few seasons. Water builds up behind the wall, expands the clay, and pushes the courses outward. We rebuild these walls with proper reinforcement, a drainage column, and a leveling pad that can handle the soil movement.
Belgard Parts & Our Repair-vs-Replace Approach
We install genuine Belgard pavers and wall block on every project, because mixing an off-brand paver into a Catalina field looks like a patch, not a repair. For jointing and edge restraint, we use approved polymeric sand and commercial-grade aluminum edging that match Belgard’s installation standards. We keep replacement Belgard units and matching colors in Belgard Construction in Benbrook, TX and local Fort Worth stock so most repairs do not wait on a distributor.
Our repair-versus-replace call is simple. If the base is compromised, we recommend full replacement of the settled area and recompaction, not a surface patch. Spot patching a paver over a failed base just moves the problem a few feet. If the edge restraint has failed, that is a perimeter repair. If the block itself is fine and the issue is joint sand, that is a same-day fix. We will show you the difference and quote the smaller repair when it is the honest answer. Call (682) 708-9180 and we will come look.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We pull the problem area apart far enough to see what is happening underneath: base depth, compaction, edge restraint condition, and drainage path. On a Belgard paver driveway, this often means lifting a section at the failure point and measuring what is below the bedding layer.
- 2
Repair or rebuild. If the base is sound, we reset pavers, re-sand joints, and lock the edge. If the base failed, we remove the affected area, recompact and grade a proper road base, then reset the Belgard units on fresh bedding sand. Retaining wall repairs include geogrid and a drainage column behind the block.
- 3
Test. We run a plate compactor over the reset field, check surface grades for drainage, and walk the perimeter to confirm the edge restraint is holding. For retaining walls, we check plumb and backfill drainage before we call it done.
- 4
Warranty and clean-up. Our 365-Day Done Right Promise covers every completed Belgard project. If it is not done right, we make it right. We leave shoe covers at the door during the job, drop cloths on any interior walk path, and a photo of the clean-up before the crew leaves.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Fort Worth
We work with the Belgard Catalina Paver Series, Mega-Arbel Paver Series, Dublin Cobble Paver Series, and the Weston Stone Wall Block System. That covers driveways, patios, pool decks, outdoor kitchens, fire features, and retaining walls across Fort Worth. We maintain a local stock of replacement Belgard units in common Fort Worth colors so repairs and extensions do not sit idle waiting on a supplier.
We Also Service These Brands
While this page is about our Belgard work, most Fort Worth remodeling projects combine multiple brands and our General Contractor services. We also install KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures. The written price you receive before we start lists every named material, so you know exactly what goes into the project and what the warranty covers.
FAQs – Belgard Construction Service in Fort Worth
Yes, in most cases we can match new Belgard units to your existing patio, but a 10-year-old field will look slightly different from a fresh production run. Color blends shift over time and weathering changes the surface tone. We pull a sample from your existing patio and compare it against our local Fort Worth stock and current Belgard color lines to find the closest match. Sometimes the best result is to mix the new units across the extension so any difference reads as natural variation, not a visible seam. Call (682) 708-9180 and we will bring color samples to your door.
Edge restraint failure. The plastic or thin steel edging installed along the perimeter has shifted in Fort Worth’s expansive clay, and once the edge lets go, the outside rows of pavers migrate outward and the joints open up. The fix is to pull the perimeter, install commercial-grade aluminum edge restraint with proper spikes, and recompact the bedding before resetting the pavers. We do this repair regularly on Belgard driveways across Fort Worth, and it stops the spreading for good.
A properly built Belgard paver driveway with a compacted 6-inch road base and solid edge restraint should last 20 to 25 years in Fort Worth before the base needs attention. Driveways built on a thinner or poorly compacted base often need rebuilding within 5 to 8 years, because Fort Worth’s shrink-swell clay and occasional heavy rains stress the base in a way that sandy soils do not. If your driveway is developing ruts or a depression, call (682) 708-9180 for an assessment and a written price.
We can sometimes install Belgard pavers over a concrete slab, but only when the slab is structurally sound, has adequate drainage, and sits at a grade that allows the added paver height without creating trip hazards at door thresholds. If the slab is cracked or settling, the pavers will follow that movement and the patio will fail. We evaluate the slab condition and drainage first, then recommend either an overlay or a full removal and rebuild, whichever gives you a patio that stays flat.
Yes. A leaning Belgard Weston Stone wall usually means the original install lacked geogrid reinforcement or drainage behind the block. Water pressure builds in the clay soil, expands, and pushes the wall out of plumb. We rebuild the wall with proper geogrid, a drainage column, and a leveling pad suited to Fort Worth’s soil movement. This is not a surface repair; it is a structural correction, and it is the only fix that lasts.
How much does Belgard construction cost in Fort Worth?
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Belgard Paver Repair (spot repaving and recompaction) | $1,200 – $4,500 |
These ranges reflect what we see on Belgard projects across Fort Worth. Your written price depends on square footage, base condition, and edge restraint needs, and we give it to you before any work starts. Call (682) 708-9180 for an exact quote. Estimates are free.
Book Your Belgard Service in Fort Worth, TX
If your Belgard driveway, patio, or retaining wall needs repair in Fort Worth, call (682) 708-9180. We will schedule a visit, assess the base and edge condition, and hand you a written price before any work begins.
Written by Graham Stein, Owner at Elmstead Remodeling Fort Worth, serving Fort Worth since 2005.
