







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Driveway & Pavers: The Fort Worth Owner’s Guide
If you’re searching for ECO Window Systems driveway and paver components in Fort Worth, you’re likely looking at a cracked paver, a shifted border course, or a drainage problem where the driveway meets the house. We stock ECO Window Systems-compatible driveway and paver parts and typically install them for $7,000 – $18,000 depending on driveway size, current sub-base condition, and the specific paver line your home was built with. Most Fort Worth homeowners discover the failure after a heavy rain, when water pools against the garage slab or a wheel sinks into a soft spot that wasn’t there last spring. The frustrating part is rarely the paver itself; it’s the base layer underneath that North Texas clay has heaved and shifted over a few seasons.
We’re an independent contractor in Fort Worth, not affiliated with ECO Window Systems, but we work with their driveway and paver product lines regularly.
Which ECO Window Systems Models This Applies To

ECO Window Systems driveway pavers come in three standard thicknesses: 60mm for pedestrian and decorative borders, 80mm for residential driveways, and 100mm for heavier vehicles or commercial approaches. The model number is stamped on the underside of the paver or printed on the delivery slip from the original install. Look for a code that starts with “EWS-DP” followed by the thickness and a color batch number.
The gotcha we see often in Fort Worth: homeowners buy replacement pavers by color name alone, but ECO Window Systems runs color batches that vary slightly in iron-oxide pigment from year to year. A paver that looks identical on a phone screen will show the difference against a five-year-old sun-faded driveway. We ask for a photo of the stamp side and a corner chip sample before ordering. For driveways older than seven years, we’ll usually recommend a quality aftermarket equivalent that matches the current sun-faded color rather than a fresh OEM paver that will stand out for the wrong reason. The OEM option matters more when you’re replacing under warranty or when the paver sits in a fully shaded area where UV fade is minimal.
Styles & brands we work with







Signs Your ECO Window Systems Driveway & Pavers Are Failing
- Water pooling against the garage slab after rain. The sub-base has settled, usually at the lowest corner. This isn’t a paver problem yet; it’s a base-layer problem that will become a paver problem.
- A single paver rocking or tilting underfoot. The bedding sand has washed out beneath that one unit, often because a downspout empties too close to the edge. Fixing the paver without relocating the downspout buys you about one season.
- Hairline cracks across multiple pavers in a line. The base has heaved along a soil moisture boundary. In Fort Worth, the eastern side of a driveway gets afternoon shade and holds moisture longer than the west side, so cracks often track along that transition line.
- Border or edge course pulling away from the field. The edge restraint wasn’t pinned deeply enough, or roots from a nearby tree are pressing outward. This is the most common failure on driveways installed before 2015.
- Sand or fine grit washing onto the street after every rain. The joint sand is eroding, and the pavers are beginning to shift individually. Left alone, the next step is chipped edges and pavers that no longer interlock.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full ECO Window Systems driveway replacement in Fort Worth runs $7,000 – $18,000. A partial repair, where we lift and re-bed a section of pavers, typically falls between $1,200 and $4,000 depending on square footage and whether the base needs to be re-compacted.
- Full paver driveway replacement: $7,000 – $18,000
- Partial paver repair (re-bed and re-sand): $1,200 – $4,000
- Edge restraint repair only: $400 – $1,200
- Joint sand replenishment and sealing: $250 – $700
Our written price includes demolition of the old surface, base material, bedding sand, the pavers themselves, edge restraints, joint sand, and full clean-up with a photo of the finished work before the crew leaves. No change orders unless you request extra work. We carry paver installation in our scope the same way we carry remodel work: the written price and the final invoice should read the same. If they don’t, that’s on us to explain before we hand you a pen.
DIY or Call Us?
Replacing one or two pavers on a small area is something a careful homeowner can do with a pry bar, a bag of bedding sand, and patience. The pavers themselves aren’t dangerous; they’re just heavy and awkward, and hunching over them for a full weekend is how back injuries happen in driveways across Tarrant County every spring.
Where we step in is when the base layer has failed. Compaction, drainage correction, and edge restraint are not weekend projects, and doing them wrong means the same driveway fails again in two years. Fort Worth’s clay soil expands and contracts enough that a poorly compacted paver base will telegraph every moisture change as a hump or a hollow. If your pavers are moving, cracking, or letting water stand, call (682) 708-9180 and we’ll walk the driveway with you and tell you honestly what’s worth fixing and what’s worth replacing.
FAQs

A properly installed paver driveway with a compacted base and good drainage will last 25 to 40 years in Fort Worth, though you’ll want to replenish the joint sand every five to seven years. The pavers themselves are incredibly durable; the base and the drainage are what determine lifespan.
Yes, single pavers and small sections can be repaired as long as the base underneath is still stable. We’ll confirm that before lifting the paver, and if the base has washed out, we’ll address that first so you’re not paying for the same repair twice. Call (682) 708-9180 for a free estimate on a partial repair.
A typical Fort Worth residential driveway replacement takes four to seven working days from demolition to final joint sand. Weather can stretch that; we work around rain days and don’t rush the compaction steps because that’s where the failure starts.
We stock common 80mm residential pavers in the two most frequent Fort Worth colorways and keep edge restraints and joint sand on the truck. Uncommon colors, 60mm decorative units, and 100mm commercial-grade pavers are special-ordered, usually with a three to five business day lead time. We also work with named-brand material partners like KraftMaid, Cambria, and Silestone when a driveway project ties into a larger exterior renovation.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.


