ES Windows Roofing Nationwide

ES Windows Roofing: The Fort Worth Owner’s Guide

We install and replace ES Windows-compatible roofing systems across Fort Worth, with most residential installations running between $8,000 and $20,000 depending on roof size, pitch, and the specific ES Windows trim and flashing package your home needs. If you’re reading this, chances are you’ve spotted a leak, a lifted corner, or water staining on a ceiling after a hard Texas storm, and you want to know exactly what it will take to make it right. Here’s what we tell every homeowner who calls us: we can replace the failed section or the full roof, we stock the commonly needed ES Windows flashing and seal components on our trucks, and you’ll have a written price before a single tool comes off the truck.

Call (682) 708-9180

Key Takeaways

• Typical ES Windows roofing replacement in Fort Worth runs $8,000 – $20,000 installed
• We stock ES Windows-compatible flashing, sealant, and fasteners on our service trucks
• Written price before work starts, every time, no exceptions
• 365-Day Done Right Promise covers every roofing job we complete
• Elmstead Remodeling Fort Worth is an independent contractor, not affiliated with ES Windows

Which ES Windows Models This Applies To

ES Windows manufactures several roofing-integrated product lines, and the compatibility picture is where Fort Worth homeowners get frustrated. The two you are most likely dealing with are the ES Vinyl Series (single-hung, double-hung, and sliders with integrated nailing fins that tie into the roof deck) and the ES Aluminum Series, which uses a different flashing profile and a wider mounting flange. The critical measurement is the nailing fin width: ES vinyl units ship with a 1-1/4″ integrated fin, while the aluminum series runs 1-1/2″, and mixing the wrong flashing channel leaves a seam that pulls apart in the first strong wind. Look for the etched product code on the lower corner of the glass or the frame interior; the last three digits tell you the series. For most Fort Worth homes built after 2010, OEM ES Windows parts are worth the premium because the factory sealant is formulated for the specific frame geometry, but for flashing and roof-to-wall transitions, a quality aftermarket product from a manufacturer like GAF or CertainTeed performs just as well and often carries a transferable warranty.

Signs Your ES Windows Roofing Is Failing

• Water staining on interior ceilings or walls near window corners: This is the classic first sign. The ES Windows integrated flashing has pulled away from the roof deck or the sealant bead has dried and cracked, letting water run down the inside of the wall cavity instead of out over the shingles.
• Lifted or curled shingles within 12 inches of the window frame: Texas heat cycles break the adhesive strip on shingles, and the first place you’ll see it is where the roofer had to hand-seal around the window flange. When the shingle lifts, the nails lose their grip and the roof leaks at the exact point where the window meets the roof deck.
• Caulk or sealant pulling away from the window-to-roof junction: ES Windows uses a specific color-matched sealant, but every sealant has a lifespan, and Fort Worth’s UV exposure shortens it to about 7 – 10 years. If you can see daylight through a gap or the caulk feels hard and brittle when you press it, the seal is gone.
• Daylight visible through the attic around the window framing: This one is easy to check yourself on a sunny afternoon. If you can see light where the ES Windows frame meets the roof sheathing, water has a path in, and it is only a matter of time before a heavy rain finds it.
• Granules from shingles collecting in gutters near windows: As shingles around the window flashing wear out, the ceramic granules wash down, and you’ll see them accumulating in the gutter directly below the window. That granule loss means the shingle is losing its UV protection and the fiberglass mat will soon start to crack.

Replacement Cost & What’s Included

For a full ES Windows roofing replacement in Fort Worth, expect to pay between $8,000 and $20,000 depending on roof square footage, pitch, and how much of the existing flashing and seal system needs to be rebuilt. A partial repair, where we replace just the failed flashing and the surrounding shingles around one or two windows, typically falls in the $400 to $1,800 range. What drives the cost up is not the window itself but the transition work: cutting back the existing roof to expose the nailing fin, installing new ice-and-water shield, re-flashing the window, and weaving in the replacement shingles so the repair blends with the existing roof. Every quote we write includes the parts, labor, tear-off of the failed material, and a photo of the clean-up before the crew leaves. The 365-Day Done Right Promise applies to every ES Windows roofing repair or replacement we complete: if it is not done right, we make it right at no additional charge. Graham Stein writes every scope of work down before a tool comes off the truck, and the written price and the final invoice should read the same; if they don’t, that is on us to explain before we hand you a pen.

DIY or Call Us?

There are a few things you can safely do yourself to diagnose the problem: check the attic for daylight, inspect the visible sealant for cracking, and note any water staining inside. What you should not do is get on a ladder and start pulling shingles or prying up flashing. Roof-to-wall junctions are load-bearing connections, and the ES Windows nailing fin is under constant tension from the roof deck’s expansion and contraction. If you remove the wrong shingle or break the fin, you create a bigger leak than you started with, and a fall from even a single-story Fort Worth roof can put you in the hospital. Our technicians do this work in harnesses with proper tie-offs, and they know the ES Windows flashing geometry well enough to do the repair without damaging the window frame. If you have spotted any of the signs above, call (682) 708-9180 and we will come out, inspect the junction, and give you a written price before any work starts.