Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Driveway & Pavers: The Fort Worth Owner’s Guide
IKO driveway and paver products in Fort Worth typically cost $7,000 – $18,000 installed for a full paver driveway, with replacement parts and repair work running considerably less depending on what failed. We stock IKO-compatible pavers, edge restraints, and base materials on our trucks for most Fort Worth jobs, and we can usually match your existing IKO paver color and profile same week. Most owners discover a failing IKO driveway the way you probably just did: a paver sinks after heavy rain, an edge restraint pops loose near the curb, or sand washes out between joints and the surface starts shifting underfoot.
Elmstead Remodeling Fort Worth is an independent service provider. We are not affiliated with IKO, but we work with their paver lines regularly and know where their products hold up well in North Texas clay soil, and where they need help.
Which IKO Models This Applies To
IKO’s paver lineup in the Texas market splits into two families: their interlocking concrete pavers (the Cambridge and Windermere profiles are the ones we see most often in Fort Worth driveways, patios, and walkways) and their segmental retaining wall blocks. The compatibility gotcha that trips up most owners is that IKO color lots shift between production runs. A “Charcoal” paver ordered in 2021 will not match a “Charcoal” paver from 2024 exactly. UV exposure on a Fort Worth driveway adds another layer of fade, especially on the sun-facing side of the house. When you call us for a repair, we ask for a photo of the paver top and side profile plus the approximate install year, so we can match the lot rather than just the color name.
For OEM versus aftermarket: IKO’s own pavers run about 15 – 20% higher than equivalent-quality aftermarket brands like Belgard or Pavestone. For a full driveway replacement in Fort Worth, that difference can mean a few thousand dollars. If you’re repairing a section rather than replacing the whole driveway, we recommend staying with IKO pavers so the color and dimensional match is as close as possible. If you’re starting fresh and like an IKO profile, we will show you side-by-side samples with aftermarket equivalents and let you decide where the money goes. Graham Stein’s habit of writing every material line into the scope of work means you will see exactly which brand and profile is quoted, before anything gets ordered.
Styles & brands we work with
Signs Your IKO Driveway & Pavers Is Failing
- Pavers sinking or dishing in one area. This is almost always a base failure, not a paver failure. North Texas clay expands and contracts with moisture, and if the original install skimped on the compacted aggregate base, the pavers follow the soil down. You will usually see it first near downspouts or where water pools.
- Sand washing out between joints after rain. Fort Worth’s spring downpours expose weak joint stabilizer fast. When the polymeric sand washes out, pavers start shifting laterally under car tires. Left alone, the edges chip and the pattern drifts.
- Edge restraint popping up or separating from the driveway. The plastic or aluminum edging that holds the outer row of pavers in place fails when it wasn’t spiked deeply enough, or when a car consistently cuts the corner. Once the edge lets go, the whole outside course starts walking outward.
- Hairline cracks spreading across multiple pavers. IKO pavers are rated for residential driveway loads, but if the base was uneven, point-loading cracks the paver from underneath. A single cracked paver is easy to swap; cracking across several pavers in a line points to a base problem underneath.
- Standing water that didn’t pool before. A driveway that once drained and now holds water means the slope has shifted, usually from base settlement. Pooling water accelerates paver degradation and joint sand loss, which compounds the problem season after season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full IKO paver driveway replacement in Fort Worth, expect $7,000 – $18,000 depending on square footage, base condition, paver profile, and whether we’re hauling off the old surface. A partial repair, like re-setting a sunken section of 100 – 200 square feet, typically runs $1,200 – $3,500 including new base material, joint sand, and paver replacement where needed. Edge restraint repair alone usually lands between $400 and $1,200.
Every quote includes the written price before any work starts, the pavers and base materials itemized by line, haul-off of old material if the job calls for it, and the 365-Day Done Right Promise. If a repaired section settles again within a year, we come back and make it right at no charge. Shoe covers and drop cloths apply inside the house if the crew needs to pass through; for driveway work, the protection promise shifts to turf mats where wheelbarrows cross grass and a full sweep of the work area before we leave.
DIY or Call Us?
You can safely do two things yourself: identify which pavers are loose by walking the driveway and tapping with a rubber mallet, and keep water flowing away from the paver field by cleaning out downspouts and regrading splash blocks. Stopping a small edge issue early costs nothing and can buy you a year or two. What you should not do is start pulling pavers and re-setting them yourself. The dangerous part isn’t the paver; it’s the temptation to shortcut the base. A paver re-set without proper base compaction and joint stabilization will sink again within months, and in the meantime the shifting surface creates a trip hazard for kids and a grinding surface for car tires. If water has been eroding the base for a season, call us before you start lifting anything. Our number is (682) 708-9180, and a live person answers.
FAQs
IKO interlocking pavers in Fort Worth typically last 25 – 30 years with proper base installation, though the base itself may need re-leveling every 10 – 15 years as North Texas clay shifts. The pavers themselves rarely wear out; it is the soil underneath that fails first. Call (682) 708-9180 if your pavers are shifting or sinking, and we will tell you whether you need a repair or a full re-base.
Yes, most IKO paver driveways in Fort Worth can be repaired rather than fully replaced, unless the base failure covers more than half the driveway or the pavers themselves are cracked throughout. We match the paver color and profile as closely as the original lot allows, and we will tell you honestly if a repair will look patchy. Call (682) 708-9180 for a free assessment.
A partial paver repair in Fort Worth usually takes one to two days, including base re-compaction and joint sand application; a full driveway replacement typically runs three to five days depending on size and weather. We schedule noisy demo work outside school-pickup hours when families are home, as Graham Stein does on every Fort Worth job. Call (682) 708-9180 and we will give you a written timeline with your written price.
We stock IKO paver profiles and edge restraints on our trucks for most Fort Worth repair jobs, and we order specific color lots from our local supplier when an exact match is required. If you have a paver that needs matching, text or email a photo of the top and side profile before we come out. Call (682) 708-9180 and we will confirm what is on the truck before we schedule the visit.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
