Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Driveway & Pavers: The Fort Worth Owner’s Guide
If you have a Master Halco driveway, gate, or paver system and a part has failed, we can source the replacement and handle the install. Master Halco driveway and paver installations in Fort Worth typically run $7,000 – $18,000 for a full build, but a single failed component, like a gate hinge, a driveway alarm sensor, or a cracked paver section, is usually a much smaller repair, often $150 – $800 depending on the part. Most Fort Worth homeowners discover a problem the same way: a gate that drags, a sensor that stops chirping, or pavers that have shifted after a hard rain and now sit proud of the surrounding surface.
We are an independent remodeling and contracting company, not a Master Halco dealer or affiliate. What that means for you is simple: we match the part to your existing system, give you a written price before any work starts, and install it cleanly. Graham Stein, our owner, still writes every scope of work down before a single tool comes off the truck.
Which Master Halco Models This Applies To
Master Halco is best known in Texas for fence systems, gate hardware, and post-and-panel products, but the driveway and paver side of their catalog covers gate operators, hinges, latch posts, and some perimeter paver edging. The most common part failures we see in Fort Worth involve the gate operator arm on slide gates and the hinge brackets on swing gates. If you are unsure which model you have, look for a small aluminum tag on the gate frame or the operator housing. It will list a model number starting with letters like MH, GT, or post a serial number. That tag is the fastest way for us to match the part, so do not remove it if you can avoid it.
One compatibility gotcha: Master Halco gate hinges are sized by gate weight and post dimension, not just by the opening width. A hinge rated for a 6-foot gate will not hold a 10-foot gate, even if the bolt pattern looks identical. We measure the post, weigh the gate, and check the swing path before we order anything. For OEM parts versus aftermarket, we are honest with you. Some Master Halco brackets are proprietary and worth buying OEM. Other parts, like gate wheels and latch posts, have quality aftermarket equivalents that save you money without shortening the life of the system. We will tell you which is which on your specific repair.
Styles & brands we work with
Signs Your Master Halco Driveway & Pavers Is Failing
- Gate drags or scrapes the driveway. This usually means the hinge bracket has pulled loose from the post, or the gate wheel is worn flat on one side. Left alone, the gate will pull the post out of plumb and the repair cost climbs.
- Sensor does not beep or the light does not trigger. Most often it is a dead sensor battery or a dusty lens, but if the housing has taken a hit from a storm branch, the board inside may be cracked. We can test and replace either way.
- Pavers shift or sink after rain. Fort Worth’s clay soil expands and contracts. If the paver edging from the original install was plastic rather than aluminum, it fails first, and the pavers start to wander. This is the most common repair we quote in areas like Fairmount and Wedgwood.
- Gate opener runs but gate does not move. This points to a stripped drive gear inside the operator, a broken chain, or a sheared key on the drive shaft. The part is usually inexpensive, but the labor to unbolt the operator and re-time the gate is not a ten-minute job.
- Rust bleeding from hinge bolts or post caps. Surface rust is cosmetic, but rust at the weld points means the bracket is fatiguing. That is a replacement, not a paint job, and worth doing before the gate drops.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are the installed price ranges we quote most often in Fort Worth for Master Halco-related driveway and paver repairs:
- Gate hinge replacement (set of 2): $150 – $450
- Gate operator drive gear or chain: $200 – $600
- Driveway alarm sensor replacement: $100 – $350
- Paver edging replacement (aluminum, per 20 linear feet): $300 – $800
- Individual paver reset and re-level: $200 – $500 per section
- Full driveway replacement (tear-out and new install): $5,000 – $14,000
The range depends on gate weight, post condition, and whether the existing concrete or paver base is still sound. Every quote includes the part, the labor, clean-up, and our 365-Day Done Right Promise. If it is not done right after the job is complete, we make it right. The written price and the final invoice should read the same – if they don’t, that’s on us to explain before we hand you a pen.
DIY or Call Us?
Some checks are safe for any homeowner. You can wipe down a sensor lens, replace a sensor battery, clear debris from a gate track, and look for loose bolts on hinge brackets. Those are maintenance items, not repairs. What we do not recommend is unbolting a gate operator or a hinge bracket on a gate that weighs several hundred pounds. A falling gate or a spring-loaded operator arm can break a hand or worse. If the part is under tension or holding weight, call us. We are at (682) 708-9180 and we answer the phone with a live person, not a voicemail box.
One thing we have learned working on Fort Worth homes for years: the soil moves, the sun bakes the plastic parts, and the gate that worked fine in March will act up by August. You are not imagining it. We see it constantly from Rivercrest to Tanglewood.
FAQs
In Fort Worth’s heat and clay soil, a well-installed Master Halco gate and paver system typically lasts 12 to 20 years before the first major component failure, with gate hinges and operator gears usually going first. Pavers themselves can last decades, but the edging and base often need attention at the 8 to 12 year mark. Call (682) 708-9180 for an honest assessment of your specific setup.
Yes, some parts can be repaired – a stripped operator gear can sometimes be shimmed, and a loose hinge bracket can often be re-seated with new anchors. But if the metal is cracked or rusted through at the weld, repair is a short-term patch. We will show you the failed part and explain your options before you commit to anything.
Most hinge, sensor, and operator gear replacements take 2 to 4 hours on site, and we usually complete them in a single visit. Paver re-leveling and edging replacement can run a full day depending on how much ground has shifted.
We stock common gate hinges, latch posts, sensors, and paver edging on our trucks, so many repairs are done same-day in Fort Worth. For proprietary Master Halco operator parts, we order directly and typically have them in hand within 3 to 5 business days. Call (682) 708-9180 with your model number and we will tell you exactly what we have and when we can be there.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
