Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Fort Worth Owner’s Guide
Therma-Tru fence installation in Fort Worth typically runs $3,500 to $9,000 for a complete post-and-panel system built around Therma-Tru door and entry components, with most residential jobs finished in two to four days. We stock Therma-Tru-compatible gate hardware, post sleeves, and entry-frame components on our trucks, and we schedule fence work around your household’s rhythm – not the other way around. Most Fort Worth homeowners call us after they’ve noticed a gate dragging against the latch post, a door frame that’s pulling away from the fence line, or a post that’s started leaning after a spring storm.
Before any tools come off the truck, you get a written price for the entire fence installation. That’s how Graham Stein runs every job, and it’s been the standard at Elmstead Remodeling Fort Worth since day one. The written price and the final invoice should read the same – if they don’t, that’s on us to explain before we hand you a pen.
Which Therma-Tru Models This Applies To
Therma-Tru builds entry doors, but plenty of Fort Worth homes pair those doors with Therma-Tru frame kits, gate stiles, and post wraps in fence runs along the side yard or front entry. The compatibility question comes down to three things: the series label on the door or gate slab, the hinge prep spacing, and whether the frame is a standard outswing or a custom inswing configuration. Therma-Tru’s Smooth-Star and Classic-Craft lines both show up in Fort Worth fence gates, and they don’t share hinge geometry. We check the slab stamp before we order anything.
Here’s the gotcha most people don’t know: Therma-Tru’s fiberglass door slabs are dimensionally stable, but the wood frame kits many builders install around them are not. In North Texas heat and clay soil, those frames swell, bow, and pull hardware out of square. We use OEM Therma-Tru slabs whenever the original is worth saving, and we pair them with pressure-treated or composite post systems that handle Fort Worth’s wet-dry cycle without the same movement.
Elmstead Remodeling Fort Worth is an independent contractor, not a Therma-Tru dealer or factory affiliate. That means we can honestly tell you when an aftermarket post sleeve or gate hinge is the better long-term call, and when you should stick with OEM.
Styles & brands we work with
Signs Your Therma-Tru Fence Installation Is Failing
- Gate drags or won’t latch cleanly. The slab has settled or the frame has twisted out of square. In Fort Worth’s clay soil, slab movement of a half-inch is common after two or three wet-dry seasons.
- Post lean near the gate. The post wasn’t set deep enough or the concrete collar cracked. Fort Worth’s freeze-thaw cycles and heavy spring rains expose shallow post settings fast.
- Hardware pulls out of the frame. The Therma-Tru slab itself is usually fine; the wood stile behind it has rotted or split from repeated slamming and humidity cycling.
- Gap opens between the fence panel and the door frame. The fence stringers have shrunk or the post shifted, pulling the entry frame out of alignment with the door slab.
- Visible rust or corrosion on hinges and latch hardware. Fort Worth’s summer humidity and irrigation overspray eat uncoated hardware. We replace with stainless or powder-coated hardware rated for exterior exposure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Therma-Tru fence installation or replacement in Fort Worth runs $3,500 to $9,000 depending on how much of the existing structure is salvageable. A gate-only swap with new Therma-Tru-compatible slab, hinges, and hardware lands at the lower end. A full post replacement with new gate frame, slab, hardware, and fence-run reattachment lands at the upper end.
Every quote includes parts, labor, haul-away of the old materials, and a written price before work starts. No change orders because a post was rotted behind the fence line. We tell you that during the estimate walkthrough. The 365-Day Done Right Promise covers the completed installation; if a gate sags or a latch binds during that year, we come back and fix it.
We work with named-brand materials you can research: KraftMaid for cabinetry, Cambria and Silestone for countertops, and Therma-Tru for door and entry components. Manufacturer warranties stay with the finished project.
DIY or Call Us?
You can safely check your fence alignment with a level and a tape measure. If the post has shifted more than an inch, or the gate slab is out of square by more than a quarter-inch, that’s a structural issue, not a hardware adjustment. Digging out and resetting a gate post in Fort Worth clay is not a weekend project; do it wrong and the gate re-settles within a season.
Replacing a Therma-Tru gate slab or resetting a post involves lifting a door that can weigh more than a hundred pounds, cutting out old anchors, and repouring a concrete collar that needs to cure before hardware goes back on. If the gate is near a fence run your kids or dog use daily, a half-secured gate is a risk. We handle the full swap, from concrete to final latch adjustment, so you’re not left holding a slab and a cordless drill after dark.
If the gate still opens and closes and you want a real number, call (682) 708-9180. We’ll walk the fence line with you and tell you what it costs to fix it right.
FAQs
A properly set post with a concrete collar and pressure-treated or composite structure should last 15 to 25 years in Fort Worth; the gate hardware and weatherstripping typically need attention every 5 to 8 years depending on sun exposure and irrigation overspray. Call (682) 708-9180 for an assessment of your specific fence line.
Yes, in most cases we replace or rebuild only the gate slab, frame, and hardware that are failing, and leave the rest of the fence intact. The written estimate will show exactly what gets replaced and what stays.
Most Fort Worth fence installations take two to four working days, including concrete cure time for new gate posts before the slab is re-hung. We schedule noisy work outside school-pickup hours when your family is home.
We carry common Therma-Tru-compatible hinge sets, latch hardware, post sleeves, and pressure-treated post stock on our trucks, and we order series-specific slabs or custom hardware for same-week delivery in Fort Worth. Call (682) 708-9180 with your model information and we’ll confirm the part before the crew arrives.
Call (682) 708-9180 for a free estimate on Therma-Tru fence installation in Fort Worth. You’ll get a written price, a straight answer about what’s failing, and a crew that treats your gate, your fence, and your yard like part of your home – because they are.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
