Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Fort Worth Owner’s Guide
If your Tremron driveway or paver hardscape is showing cracks, settling, or failing joints, we stock Tremron-compatible pavers and installation materials for Fort Worth homes, with installed replacement work typically running $7,000 – $18,000 depending on square footage and site conditions. Most paver repairs in the Fort Worth area can be quoted within one visit and scheduled without displacing your family for weeks at a time. The most common way owners discover a failing paver area is after a heavy rain, when water pools in a low spot that didn’t exist last year, or when a tire catches an edge that has shifted out of level. We’ve also walked Fairmount and Wedgwood driveways where the real problem wasn’t the paver itself but the base material underneath it, laid years ago without adequate crushed-stone depth for Texas clay soil.
Elmstead Remodeling Fort Worth is an independent service provider and not affiliated with Tremron. We work with Tremron products because Fort Worth homeowners know the name and ask for it by brand.
Which Tremron Models This Applies To
Tremron manufactures paver lines in several sizes and finishes, and the part that matters most is not always the paver itself but the system around it. The Jacksonville, Stonehurst, and Miami paver series are the ones we see most often in Fort Worth driveways, patios, and pool decks. Identifying your exact paver starts with measuring a single unit: most Tremron driveways use 60mm or 80mm-thick pavers, while walkways and patios often run 50mm. The thickness matters far more than color when matching, because a 50mm paver placed next to an 80mm paver will not sit flush no matter how carefully it’s set.
For replacements, we prefer matching the original Tremron product when it’s still in production, and we order by the pallet or half-pallet so the color lot is consistent. Color variation between manufacturing runs is real, and in Fort Worth sun exposure, a single replacement paver that was cut from a different lot will be visible for years. When the original line has been discontinued, we recommend a quality match from the same color family rather than forcing a near-miss that draws the eye.
Styles & brands we work with
Signs Your Tremron Driveway & Pavers Is Failing
- Settling or sinking along the tire path. Fort Worth clay expands and contracts with moisture, and a paver driveway laid without an adequate crushed-stone base will sink where vehicles carry the load. This shows up as low spots that hold water after rain.
- Gaps widening between pavers. Sand joint loss is the first visible signal that the edge restraint has failed or the base is shifting. You’ll notice sand washing onto the sidewalk or pooling in the street after a downpour.
- Cracked or chipped pavers at the driveway apron. The transition from street to driveway takes the most force, and if the original install didn’t include a proper concrete collar, the pavers will break along that line first.
- Weeds or ants pushing up between joints. This isn’t just cosmetic. Root and insect activity signals that the sand joints have opened up enough to harbor growth, which accelerates edge breakdown every time it rains.
- Water pooling against the foundation or garage slab. A paver surface that has shifted can direct water toward the house instead of away from it, which is a problem far more expensive than the paver repair itself.
Graham Stein has walked enough Fort Worth driveways to know that one or two of these signs usually means the surface problem is a symptom, not the cause. We start every paver inspection by looking at the base and drainage before we talk about replacing individual stones.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Worth, paver driveway installation typically runs $7,000 – $18,000, and the range comes down to square footage, access to the site, the existing base condition, and whether we’re repairing a section or rebuilding the full driveway. A patio paver installation runs $3,500 – $11,000, and driveway replacement work on an existing paver surface generally lands between $5,000 and $14,000. We write every scope of work down before a single tool comes off the truck, and the price we hand you is the price on the final invoice. If a paver repair requires removing and resetting more stones than we first saw, that change gets explained and approved before we proceed, never after.
Our work carries the 365-Day Done Right Promise, meaning if something isn’t right after the job is complete, we make it right. You’ll also get shoe covers and drop cloths inside the house on any job where we’re moving through, a photo of the clean-up before the crew leaves, and quiet tools during family rest hours where possible.
DIY or Call Us?
Replacing a single cracked paver is within reach for a careful homeowner who can lift the stone with a paver extractor or two flat screwdrivers, level the sand bed, and set the new paver flush. What goes wrong in Fort Worth is rarely the paver itself, it’s the base. A paver replaced on a failing base will follow the same sink line within a season. If you’re seeing multiple low spots, standing water, or joint loss across more than a few pavers, the fix is underneath, and that’s not a weekend project. Removing and re-compacting a base properly means cutting out a section, adding crushed stone in lifts, compacting each lift, and re-setting the pavers with a plate compactor. Most homeowners don’t have that equipment sitting in the garage.
If you’d rather have us inspect it, call (682) 708-9180. We’ll tell you honestly whether it’s a two-paver fix or a base rebuild. Estimates are free.
FAQs
A properly installed Tremron paver driveway in Fort Worth should last 25 to 35 years on the paver surface itself, with the sand joints needing re-sanding roughly every 3 to 5 years due to Texas rain and sun. The base underneath, if done correctly, should outlast the pavers. Call (682) 708-9180 if your driveway is showing settling well before that, because the issue is usually installation depth, not the paver.
Yes, in most cases we can cut out and rebuild the affected section, matching the existing Tremron pavers when the line is still available and sourcing a close color match when it isn’t. The repair will be priced per square foot with the same written-price rule as a full install. Call (682) 708-9180 and we’ll tell you after inspection whether a section repair makes sense or if a full reset is the better long-term value.
A full paver driveway replacement in Fort Worth typically takes 3 to 7 working days, depending on the square footage, removals, and weather. We schedule noisy demolition outside school-pickup hours when families are living in the house, and the crew protects floors and walkways with drop cloths where we pass through. Call (682) 708-9180 for a timeline specific to your driveway.
We carry pavers we know Fort Worth driveways use most often, but because Tremron color lots vary, we order replacements per job so the match is as close as possible. For a small repair, we’ll bring the replacement pavers on the scheduled visit; for a full driveway, the pallets arrive the day before we start. Call (682) 708-9180 and we’ll tell you whether your color is in stock or needs a lead time.
If you’re standing in your driveway right now looking at a paver that’s out of place, write down the measurement and give us a call. We’ll ask a few questions, tell you honestly what we think is happening under the surface, and schedule a visit if it’s worth putting eyes on. The written price and the final invoice should read the same, and if they don’t, that’s on us to explain before we hand you a pen.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
