Wellborn Bathroom Remodeling Nationwide

Wellborn Bathroom Remodeling: The Fort Worth Owner’s Guide

We install and service Wellborn bathroom cabinets and vanities throughout Fort Worth, with typical bathroom remodeling projects running $9,000 to $28,000 depending on cabinet configuration, countertop material, and plumbing scope. If your Wellborn cabinet door hinge has stripped, a drawer glide snapped, or a vanity face frame separated at the joint, we can usually match the part and have it functional within one visit. Most Fort Worth homeowners discover the failure the way you did: a drawer that suddenly drags, a door that won’t stay closed, or a soft-close mechanism that now slams like a screen door in a March windstorm. The symptom looks small. The fix often is. But getting the wrong replacement hinge or glide will turn a thirty-minute job into a recurring frustration, which is why matching the exact Wellborn series matters more than most people expect.

Call (682) 708-9180

Which Wellborn Models This Applies To

Wellborn has produced dozens of cabinet and vanity lines over the years, and the hardware specs are not universal across them. The Premier, Estate, and Cabinetry Collections each use different hinge cup depths and overlay measurements on certain door styles. The most reliable way to identify your series is to pull one drawer and look for the Wellborn stamp on the inside of the drawer box, or check the backside of a door hinge for a manufacturer code. If the stamp has worn off, we measure the hinge cup diameter, the bore pattern, and the door overlay at the site visit, then cross-reference against the fixture and hardware catalogs we carry from the same distributors. One compatibility gotcha we see regularly in Fort Worth: a homeowner replaces a Wellborn hinge with a generic European hinge that technically fits the cup, but the overlay is off by three millimeters, and the door never sits flush against the face frame again. We stock OEM Wellborn hardware for the current series, and for discontinued lines we use a direct-fit equivalent that matches the bore pattern and overlay exactly, not an adjustable compromise. We carry KraftMaid hardware as well, since some Fort Worth homes have mixed cabinet brands between kitchens and baths, and the same discipline applies to matching Cambria and Silestone countertop profiles when the vanity top needs replacement.

Signs Your Wellborn Bathroom Remodeling Is Failing

• A drawer glides forward, then catches or grinds. The nylon rollers in the glide have worn flat on one side, which happens faster in Fort Worth bathrooms where humidity swings between summer and winter cause the wood drawer box to swell and shrink against the metal track.
• The soft-close no longer soft-closes; it thumps. The damper inside the hinge or glide has lost its fluid seal. On Wellborn vanities from the late 2000s and early 2010s, we see this particular failure often, since those damper cartridges were never designed to be serviceable, only replaceable.
• The door sags two to three millimeters at the outer corner. The hinge plate has begun pulling away from the face frame because the original screw holes stripped in the particleboard stile. Re-driving the same screw rarely lasts; the fix is a threaded insert or a longer screw with a matching pilot hole.
• Water damage at the toe kick or the bottom rail of the vanity. In Fort Worth bathrooms with tile floors, minor toilet overflow or tub splash that goes unnoticed begins wicking up the cabinet base. Wellborn uses a durable finish, but no cabinet finish is a waterproof membrane where water sits daily.
• The vanity top separates from the cabinet box or shifts under hand pressure. The original silicone bead has dried and cracked, which is normal after eight to twelve years, but it allows water to reach the cabinet deck and, eventually, the face frame.

Replacement Cost & What’s Included

For a Wellborn bathroom remodel in Fort Worth, most projects land between $9,000 and $28,000. The spread is driven by whether we are replacing hardware on an existing Wellborn vanity, replacing the vanity and top entirely, or doing a full bathroom remodel with shower and flooring. A hardware-only repair call, for context, is usually under $400 for parts and labor when we can match the series from our truck stock or the local distributor. A new Wellborn vanity with Cambria or Silestone top installed typically runs $3,500 to $8,000 within the larger project range. Every job includes the written price before any work starts, with parts and labor separated on the page so you can see exactly what the hardware costs versus the time to install it. The 365-Day Done Right Promise applies to the finished work: if something we installed or adjusted fails within the first year, we make it right at no charge.

DIY or Call Us?

The safe DIY checks are visual: look for the Wellborn stamp inside the drawer box, measure the hinge cup to see if it is 26mm or 35mm, and note whether your doors sit fully or partially over the face frame. If the damage is a stripped screw hole in a wood stile, a homeowner with a drill and the right size threaded insert can often fix it in under an hour. Where Fort Worth homeowners get into trouble is ordering a hinge or glide based on photos and “universal fit” listings online, then discovering the overlay is wrong and the door binds. For anything involving water damage that has reached the cabinet box, or a vanity that has shifted enough to pinch plumbing lines, call (682) 708-9180. That work needs a contractor who can see the full picture, and whose written price matches the final invoice, which is the standard Graham Stein holds on every project.