Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Fort Worth Owner’s Guide
We stock and install Wellborn-compatible driveway and paver materials throughout Fort Worth, with typical installed paver driveways running $7,000 – $18,000 depending on square footage and site prep. Most homeowners discover their driveway or paver surface has failed the same way: a paver sinks after a hard rain, a crack opens across the apron, or water starts pooling where it never pooled before. The good news is that a failing paver surface is almost never a total loss. We identify the underlying cause, match the replacement material to your existing Wellborn layout, and write the price down before any work starts.
Which Wellborn Models This Applies To
Wellborn’s driveway and paver line spans several series, and Fort Worth homes we’ve serviced run the range from the older classic brick-style pavers to newer interlocking concrete units. The compatibility factor to know is this: Wellborn paver dimensions have shifted over the years, and a paver that looks identical from the top can be a different thickness underneath. Older Wellborn layouts in neighborhoods like Wedgwood and TCU often used 60mm pavers, while newer installations closer to Alliance shifted to 80mm. The thickness matters because a 60mm paver sitting next to an 80mm paver creates a visible lip and a tripping point.
To identify the right match, measure the thickness of an existing paver you can lift, and note its edge profile: squared or chamfered. OEM Wellborn replacements are ideal when we can source them, but for discontinued patterns, quality aftermarket equivalents from manufacturers like Pavestone and Belgard match load ratings and color families closely enough that the repair disappears into the existing surface. We keep common Fort Worth-area sizes in stock and can order discontinued patterns with a 7 – 10 day lead time.
Styles & brands we work with
Signs Your Wellborn Driveway & Pavers Is Failing
- Sunken pavers in tire tracks. This almost always means the compacted base underneath has eroded or was never deep enough. Fort Worth’s clay-heavy soil expands and contracts with moisture, and a base that wasn’t prepared for that movement will eventually let pavers drop.
- Standing water after a light rain. Pooling means the surface has lost its drainage slope. It’s usually a localized issue: a few pavers shifted, or a section of the base settled. Left alone, standing water works into the joints and accelerates the failure.
- Crumbling or fading paver edges. Edge restraint failure is the most common culprit. When the perimeter border flexes, individual pavers loosen and start chipping against each other.
- Weeds or ants pushing up through joints. This signals joint sand has washed out, which is both a cause and a symptom. Once the joints empty, pavers lose lateral support and begin to drift.
- A crack running across the concrete apron. For homes with a Wellborn paver driveway meeting a concrete driveway apron, a crack at that transition often means the concrete slab was poured without an expansion joint. Texas summer heat makes that concrete push against the first row of pavers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Worth homeowners, a full paver driveway installation or replacement runs $7,000 – $18,000. A paver patio is typically $3,500 – $11,000. If you’re looking at a smaller repair, such as replacing a sunken section or re-setting a border, those jobs often fall between $1,000 – $4,000 depending on how much base has to be re-compacted. What drives the range: site access, whether we’re hauling out old material, how deep the base layer needs to be corrected, and the specific Wellborn paver series involved. Every quote includes materials, labor, haul-away, and compaction of the base to Fort Worth soil standards. The written price we hand you before work starts is the price on the final invoice, and the 365-Day Done Right Promise covers every repair we complete. If it settles or shifts within the year, we’re back to fix it at our cost.
DIY or Call Us?
You can safely check a few things yourself: whether edge restraints are still in place, whether joints have sand left in them, and whether the low spots in your driveway match the path of your tires. That last one tells you whether it’s a base problem, not a paver problem. Where DIY goes sideways is base compaction. Fort Worth clay needs more than a hand tamper and hopeful thinking; it needs mechanical compaction, often with a modified stone base added. One thing Graham Stein has said more than once on a Fort Worth driveway: the paver on top is decoration. The base is the driveway. If the base fails, re-setting the same pavers just means doing the job twice.
The written price and the final invoice should read the same – if they don’t, that’s on us to explain before we hand you a pen. If you’re seeing sinking, pooling, or crumbling edges, call (682) 708-9180 and we’ll take a look. The estimate is free.
FAQs
A properly installed paver driveway in Fort Worth should last 25 – 30 years or more, with the base outlasting the pavers themselves. The Texas heat fades surface color over time, but structural failure, the kind that requires a full pull-up, comes from a bad base or poor edge restraint, not from age alone. If your driveway is under 10 years old and showing sunken areas, the base is the issue. Call (682) 708-9180 and we’ll confirm what’s happening underneath before anyone quotes a replacement.
Yes, in most cases sunken pavers can be lifted, the base re-compacted, and the same pavers re-set, as long as the pavers themselves aren’t cracked through. We only recommend full replacement when the base has failed across large sections or the existing pavers are too deteriorated to re-lay. For an exact assessment, call (682) 708-9180 – estimates are free and the written price is what you’ll pay.
A localized repair, like re-setting a sunken section or rebuilding a failed edge, typically takes one to two days. A full driveway replacement in Fort Worth usually runs three to five days, depending on access and how much old material has to come out. We schedule noisy compaction work outside school-pickup hours when families are home, and the crew uses drop cloths and shoe covers on any path through the house.
We keep common Wellborn-compatible paver sizes in stock for Fort Worth repairs and can source discontinued patterns through our supplier network, usually within 7 – 10 days. You never have to order anything yourself or guess at compatibility; that’s part of the written-price job. Call (682) 708-9180 and we’ll match what you have.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
