Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Fort Worth Owner’s Guide
If you have a Wellborn cabinet with a failed hinge, a warped drawer box, a cracked door panel, or finish that’s peeling around the sink base, we match and install the correct Wellborn-compatible replacement. A full kitchen remodeling project involving Wellborn cabinets in Fort Worth typically runs $14,000 – $45,000 depending on cabinet line, layout changes, and countertop choices, while a targeted parts replacement like a hinge pack, drawer glide set, or a single door refacing usually lands between $400 and $2,500 installed. Most Wellborn parts we source arrive within 3 – 5 business days, and we can often repair the cabinet in one visit once the part is in hand.
How owners usually discover the problem: a drawer starts catching on one side, a door hangs slightly lower than its neighbor, or the finish near the dishwasher shows white chalky streaks. Sometimes it’s quieter than that, a hinge that groans every morning for weeks before it lets go. Wellborn cabinets are built well, but Fort Worth’s dry summers and humid springs work hard on wood doors and drawer fronts. The good news is that Wellborn uses standardized hardware across most of its lines, which makes matching a replacement part more straightforward than many homeowners expect.
- Key takeaway: Wellborn cabinet parts are generally standardized by series and year. A hinge from a 2014 Wellborn Premier kitchen is not automatically identical to one from their Estate line.
- Key takeaway: We give a written price before any work starts. The number we write down is the number on the invoice.
Which Wellborn Models This Applies To
Wellborn has produced several cabinet lines over the years that show up regularly in Fort Worth kitchens: Premier, Estate, Select, and the semi-custom Wellborn Cabinet Classics series. Each line uses specific door profile thicknesses, hinge bore patterns, and drawer glide ratings. The biggest compatibility gotcha we see is with the hinge bore. Wellborn doors are typically drilled for a 35mm cup hinge, but older Premier cabinets from the early 2000s sometimes have a 32mm bore. If you order a 35mm hinge for a 32mm bore, it will not seat properly, and forcing it ruins the door. We check the actual bore diameter with a caliper before ordering anything.
To identify your line and series, look inside the drawer box or on the back of a door. Wellborn stamps a code, usually a series letter followed by a date code, on the inside of the drawer box. If that stamp is gone, the door profile and finish code are the next best identifiers. For hardware replacement, OEM parts are worth the cost when the cabinet is under Wellborn’s warranty or when the finish is a discontinued color that aftermarket hinges won’t match. For hinges and glides specifically, quality aftermarket equivalents from Blum or Salice are often the better value, because Wellborn itself sources its hardware from these manufacturers. We stock Blum soft-close hinge packs and 21-inch and 24-inch drawer glide sets on our trucks for the most common Wellborn configurations. Elmstead Remodeling Fort Worth is an independent remodeling contractor and is not affiliated with Wellborn, but we work with Wellborn’s parts catalog daily and know which aftermarket equivalents hold up.
Styles & brands we work with
Signs Your Wellborn Kitchen Remodeling Is Failing
- A door that won’t stay closed and slowly drifts open. The hinge’s internal spring has fatigued. A soft-close mechanism that now slams shut is usually the same failure in reverse: worn damper, no cushion left. In Wellborn cabinets older than 12 years, we usually see this on the doors nearest the cooktop, where heat accelerates the plastic damper’s breakdown.
- A drawer that scrapes or wobbles when you pull it. The nylon rollers inside the glide have flattened. Once one goes, the drawer sits uneven and grinds against the cabinet face frame. Continued use scores the wood, and the repair bill grows.
- Finish that’s cloudy, chalky, or peeling near the sink or dishwasher. This is moisture migration through the clear coat. Fort Worth’s hard water accelerates it. Touch-up works on early clouding; full peeling means the door or face frame should be refinished or replaced.
- Loose or stripped hinge screws on the face frame. The screws back out over years of use, especially on heavily used lower cabinets. Tightening them is temporary. The real fix is re-boring the hole and setting a threaded insert so the screw has new wood to bite.
- Separation where the door stile meets the center panel. Solid wood expands and contracts with humidity swings. When the joint separates and you can see daylight through the seam, the door is compromised. Gluing alone won’t hold if the old adhesive has failed completely.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A targeted Wellborn parts repair in Fort Worth, hinge packs, glide sets, door adjustments, or finish touch-up, runs $400 – $2,500 installed. A single-door refacing or replacement runs $300 – $900 per door, depending on profile and finish matching. A full Wellborn cabinet installation runs $4,000 – $13,000, while a complete kitchen remodel with Wellborn cabinets sits between $14,000 and $45,000. The range comes down to cabinet quantity, drawer count, finish complexity, and whether we are matching existing cabinets or installing an entirely new run.
| What you’re paying for | Typical Fort Worth installed range |
|---|---|
| Hinge pack replacement (all doors) | $400 – $1,200 |
| Drawer glide replacement (all drawers) | $500 – $1,400 |
| Single door replacement / refacing (each) | $300 – $900 |
| Cabinet installation (new run) | $4,000 – $13,000 |
| Full kitchen remodel with Wellborn cabinets | $14,000 – $45,000 |
Every parts repair includes the part itself, the labor, and the adjustment pass: we hang every door, set every drawer, and check the reveals before we call the job done. The written price covers the part and the work. If the price changes, we explain why and you approve it in writing before we proceed. Our 365-Day Done Right Promise applies to parts repair work the same as full remodels: if something is not done right, we make it right. Graham Stein’s signature phrase applies here too: “The written price and the final invoice should read the same, if they don’t, that’s on us to explain before we hand you a pen.”
DIY or Call Us?
Cabinet hardware replacement does not carry the same physical danger as high-tension springs or electrical work, so the real question is whether the diagnosis is right and whether the part matches your Wellborn era. What an owner can safely check: whether the hinge bore is 35mm or 32mm, whether the drawer glide is side-mount or under-mount, and whether the face frame has stripped screw holes. These are look-and-measure checks, no tools beyond a ruler. Where DIY goes wrong: ordering a hinge that fits the bore but not the door’s overlay, or buying a glide rated for 75 pounds when the pot-and-pan drawer needs 100-pound capacity. The wrong part either doesn’t fit, or fits and fails again in eight months. If you’d rather hand this off, call (682) 708-9180 and describe what’s failing. We’ll bring the common Wellborn parts on the first visit and source the unusual ones with a written price before any work starts.
FAQs
Wellborn hinges and glides typically last 10 – 15 years in a Fort Worth kitchen before the dampers wear out or the glides fatigue. Heavy daily use and heat from the cooktop shorten that. Soft-close mechanisms often fail before the metal itself.
If yours are wearing out, call (682) 708-9180 for an exact quote. The estimate is free.
Sometimes, but not often. A single hinge with a tired spring can be adjusted or shimmed temporarily, but once the internal damper cracks, replacement is the only fix that holds. Drawer glides are replace-only once the nylon rollers flatten. Repair makes sense when the issue is stripped screws, not failed hardware.
Call (682) 708-9180 and we’ll tell you honestly which one you’ve got, before any money changes hands.
A full hinge pack replacement on an average-sized Fort Worth kitchen takes about 2 – 3 hours on site once the parts are in hand. A drawer glide replacement across all drawers runs similar, 2 – 4 hours. Single-door replacements vary based on finish matching, but most are done in one visit.
We schedule the work at times that work for your family, quiet tools during nap hours where possible, and we leave the floor cleaner than we found it. Call (682) 708-9180 to schedule.
We stock the most common Wellborn-compatible hinge packs and drawer glide sets for the Premier and Estate lines, along with finish touch-up kits. Unusual sizes or discontinued finishes are sourced from Wellborn’s catalog or our aftermarket suppliers, typically arriving in 3 – 5 business days. We also stock compatible parts for KraftMaid, Cambria, and Silestone products when a kitchen mixes brands.
Call (682) 708-9180 and give us the code from inside your drawer box. We’ll tell you on that call whether we have it or need to order it.
If your Wellborn cabinets need a hinge, a glide, a door, or a full replacement run, call Elmstead Remodeling Fort Worth at (682) 708-9180 to schedule a free estimate. You’ll get a written price before any work starts, shoe covers and drop cloths on every visit, and a photo of the clean-up before the crew leaves.
Written by Graham Stein, Owner, Elmstead Remodeling Fort Worth at Elmstead Remodeling Fort Worth, serving Fort Worth and nearby areas.
