Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Cabinet Installation Cost in Fort Worth?
Cabinet installation in Fort Worth typically costs between $4,000 and $13,000 for a full kitchen in 2026, with most families paying around $7,500 for mid-range cabinets and professional installation. A smaller project, like installing cabinets in a laundry room or bathroom, runs $800 to $3,000. The final number depends on cabinet quality, kitchen size, and whether you’re replacing existing cabinets or starting from a blank wall.
At Elmstead Remodeling Fort Worth, a Cedarwell company, we give every family a written price before any work starts. That means the number you approve is the number you pay, not a starting point that drifts upward once the crew arrives.
Cabinet Installation Cost Breakdown (2026)
Here’s what cabinet installation costs look like across Fort Worth, from Fairmount to Keller to Benbrook. These are the numbers we quote in 2026, and they include labor, mounting hardware, and the crew’s time.
| Project Type | Cost Range (2026) |
|---|---|
| Full kitchen cabinet installation (mid-range, stock-to-semi-custom) | $4,000 – $13,000 |
| Kitchen island cabinet installation | $3,000 – $10,000 |
| Bathroom vanity installation | $800 – $3,000 |
| Laundry room or mudroom cabinets | $1,200 – $4,000 |
| Custom cabinet installation (full kitchen) | $9,000 – $18,000+ |
| Cabinet refacing (doors, drawer fronts, veneer) | $3,500 – $9,000 |
These ranges hold for most Fort Worth homes built in the last 40 years, where kitchen footprints run 120 to 220 square feet. Homes in Arlington Heights or Tanglewood with larger or historic kitchens can push past the top of the range, while a compact kitchen in Wedgwood or a 1970s ranch in Ridglea often lands closer to the middle.
Labor usually accounts for 30% to 45% of the total. The rest is the boxes themselves, plus hinges, slides, filler strips, crown molding if you want it, and any trim work. Soft-close slides and dovetail drawer boxes add roughly $800 to $1,500 to a full kitchen, and in our experience, most Fort Worth families who plan to stay in the house more than five years choose them.
What Affects Cabinet Installation Pricing in Fort Worth
Every kitchen is different, and price moves for reasons you can see once the old cabinets come out. Here’s what actually changes the number on your quote:
- Cabinet type and brand. Stock cabinets from KraftMaid or Wellborn run $4,000 to $7,000 installed. Semi-custom with more depth and finish options adds $2,000 to $5,000. Full custom, built to the exact wall, starts near $9,000. Elmstead works with KraftMaid and Wellborn by name because their warranties travel with the finished project, and you can verify the product yourself before it arrives.
- Kitchen size and layout. A 10×10 kitchen with 20 linear feet of cabinets costs less than a 15×20 kitchen with 35 linear feet and an island. Galley kitchens in North Fort Worth tend to run under $8,000. Open-plan kitchens with islands in southwest Fort Worth often exceed $11,000.
- Demolition and disposal. If we’re pulling out 1990s builder-grade boxes, that’s a half-day of labor plus a dump run. Fort Worth requires contractors to haul construction debris to an approved facility, and that fee gets built into the written price, not sprung later. Expect $300 to $800 for removal and disposal depending on volume.
- Wall condition and leveling. Fort Worth sits on expansive clay soil, and over the years, that soil shifts. Many kitchens we open up in Ridgmar and Como have walls that are no longer plumb or floors that slope a half-inch across the run. Shimming and leveling costs $200 to $700 and usually isn’t obvious until the old cabinets come down. We note it in the written price when we can see it during the estimate.
- Modifications for plumbing or electrical. If new cabinets change where the sink sits or where under-cabinet lighting lands, the general contractor scope shifts. Moving a gas line or relocating a receptacle inside a cabinet run adds $300 to $1,200 depending on the run and the age of the wiring.
- Finish and hardware selections. Painted finishes cost more than natural or stained finishes in most KraftMaid and Wellborn lines. Hardware ranges from $3 per pull to $40 per pull, and a full kitchen uses 20 to 40 pieces. We ask before moving or replacing anything, and we bring samples so you see the finish under your own kitchen light, not a showroom panel.
How Much Does Cabinet Installation Cost by Cabinet Type?
If you’re comparing cabinet lines, here’s what Fort Worth pricing looks like in 2026, installed:
- Stock cabinets (off-the-shelf sizes): $4,000 – $7,000 for a full kitchen. Limited sizes and fewer finish choices, but solid for rental properties or a quick refresh before selling.
- Semi-custom cabinets: $6,500 – $13,000. More depth options, more door styles, and the ability to fill odd wall dimensions without big filler strips. This is the sweet spot for most family kitchens.
- Custom cabinets: $9,000 – $18,000+. Built for your exact walls, your exact ceiling height, and your exact storage needs. If you’ve got a 1920s bungalow in Fairmount with no square corners, custom is often the only way to get a clean fit without visible gaps.
- Refacing vs. new installation: If your cabinet boxes are solid but the doors are tired, refacing runs $3,500 – $9,000 and keeps the kitchen functional while we work. Full replacement costs more but lets you change the layout, which refacing cannot do.
One thing that surprises people: cabinet installation cost in Fort Worth is not meaningfully different from Dallas or Plano. The labor market is tight across the Metroplex, and skilled cabinet installers charge the same whether they’re driving to Burleson or Frisco. Where Fort Worth is different is in the age of the housing stock. We work in more 1950s and 1960s homes than most Dallas crews, which means more leveling, more shimming, and more honest conversation about what’s behind the drywall.
How to Save on Cabinet Installation Without Cutting Corners
Saving money on cabinets is about making deliberate choices before the quote, not finding someone who shows up cheaper and leaves surprises. Here’s what we tell families who ask:
- Keep the layout. Moving a sink, relocating the range, or adding an island where none existed adds plumbing, electrical, and sometimes gas work. If the layout works, keep it and spend the savings on better cabinets.
- Choose stock or semi-custom over full custom. Unless your walls are genuinely out of square, semi-custom from Wellborn or KraftMaid fills the space well for thousands less than true custom.
- Reuse what’s good. If your cabinet boxes are square and the interiors are clean, refacing gets you new doors and drawer fronts at 40% to 60% of the cost of full replacement.
- Do your own demo. Some families pull out old cabinets themselves over a weekend. It saves $300 to $800, but we ask that you leave the plumbing and electrical alone and let us handle the gas if the range is involved.
- Ask for the written price up front. Every Elmstead project starts with a written number before any work begins. You can compare quotes fairly because nothing is left vague, and you’ll never get a call saying the job grew once the crew opened the wall.
For an exact number on your kitchen, call (682) 708-9180. Estimates are free, and the price you get is the one that matters.
What’s Included in Professional Cabinet Installation?
When you hire cabinet installation in Fort Worth through Elmstead, the written price includes the full scope of the job, not just the hour the cabinets go on the wall. Here’s what that looks like:
- Delivery and staging. Cabinets arrive on pallets and need to be carried in, unboxed, and staged. Our crew lays drop cloths on the floors and puts shoe covers on at the door before the first box comes through. We photograph the clean-up before we leave, every day, on every job.
- Leveling and shimming. Every cabinet is set on a level line before the face frames are screwed together. On older Fort Worth homes, that can take an hour per run. It’s the difference between a drawer that closes itself and one you fight with for 15 years.
- Mounting and alignment. Upper cabinets get screwed into studs, not drywall anchors. Face frames get clamped and fastened so the gaps are consistent. Doors and drawers get adjusted at the end so everything opens and closes like it should on day one.
- Trim, filler strips, and crown molding. Small gaps at the ceiling or walls get filled with scribe molding or filler strips that match the cabinet finish. If crown molding is in the scope, we miter it, install it, and caulk the joints.
- Hardware installation. Knobs and pulls get mounted to your specified placement. We template the holes so every pull sits at the same height across the kitchen.
- Clean-up and the photo. Before the crew leaves, the floors are swept, the counters are wiped, and scaffolding or ladders are out of the house. We then send you a photo of the cleaned space. That’s the Cedarwell Care Promise, and it’s not an add-on fee.
The crew wears uniforms, is background-checked, and asks before moving anything that belongs to your family. If there are children in the house, we schedule noisy work around nap and school hours where the project calendar allows it. If there are pets, we use pet-safe products where there’s a choice, and we’ll confirm where the dog is before we open a door.
How Long Does Cabinet Installation Take in Fort Worth?
A full kitchen cabinet installation in Fort Worth takes 2 to 5 days of on-site work once the cabinets are delivered. Stock or semi-custom boxes go in faster. Custom work with extensive trim, crown, or a pantry wall can stretch to a week. Refacing usually runs 2 to 4 days.
Delivery lead times matter more than installation time. Semi-custom cabinets from KraftMaid or Wellborn usually ship in 3 to 6 weeks from the order date. Stock cabinets can arrive in 1 to 2 weeks. Custom runs 6 to 10 weeks. We order materials only after you’ve approved the written price and the cabinet plan, so nothing moves until you’re sure about the number.
During the install, the kitchen is partially out of commission. We keep the work area contained with plastic sheeting when cutting is happening, and we leave a clear path to the refrigerator and sink for as long as practical. Every day ends with cleanup, not a pile of sawdust by the back door.
Cabinet Installation vs. Full Kitchen Remodel: What’s the Difference in Cost?
A cabinet-only installation in Fort Worth runs $4,000 to $13,000. A full kitchen remodel, which includes cabinets plus countertops, sink, faucet, backsplash, lighting, and usually flooring or appliance changes, runs $14,000 to $45,000 in 2026.
If you’re trying to decide between the two, think about what’s actually bothering you. If the layout works and the counters and sink are fine, cabinet installation or refacing is the right scope. If the countertops are laminate, the sink is a shallow double-bowl from 1997, and the lighting is one sad ceiling fixture, you may be looking at a full kitchen remodel whether or not you planned for it.
The easiest way to know is to get a written price for both scopes and compare them line by line. We’re happy to quote it both ways so you can see the real difference on paper. Call (682) 708-9180 and we’ll come out, measure, and put numbers in front of you.
Key Takeaways
- Cabinet installation in Fort Worth costs $4,000 to $13,000 for a full kitchen in 2026.
- Bathroom vanities run $800 to $3,000; kitchen islands run $3,000 to $10,000.
- Most Fort Worth families choose semi-custom cabinets from KraftMaid or Wellborn.
- Leveling and shimming matter more in Fort Worth due to expansive clay soil and older housing stock.
- Elmstead gives a written price before any work starts, every time, on every project.
- Every Elmstead installation is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right.
FAQs – Cabinet Installation Cost
How much does it cost to install cabinets in a kitchen in Fort Worth?
A full kitchen cabinet installation in Fort Worth costs $4,000 to $13,000 in 2026, with most projects landing between $6,000 and $9,000. The range covers stock through semi-custom cabinets with professional installation. Call (682) 708-9180 for an exact quote; estimates are free and the price is written before any work starts.
Is it cheaper to reface cabinets or replace them?
Refacing is cheaper. It runs $3,500 to $9,000 in Fort Worth, compared to $4,000 to $13,000 for full replacement. Refacing only works if the cabinet boxes are square and solid, which is something we can assess during a free estimate.
How much does cabinet installation cost per linear foot in Fort Worth?
Fort Worth cabinet installation runs $150 to $400 per linear foot installed, depending on cabinet brand, finish, and whether the walls need leveling. A typical 25-linear-foot kitchen lands between $6,000 and $9,000.
Can you install cabinets the same day they’re delivered?
Usually, yes. Stock and semi-custom cabinets are commonly installed the same day or the day after delivery. Custom jobs with heavy trim may need an extra day or two for molding and final adjustments. If you need a fast timeline, call (682) 708-9180 and we’ll give you a honest schedule along with the written price.
Do you give a written price before starting cabinet installation?
Yes. Every Elmstead project in Fort Worth begins with a written price before any work starts. No estimate that grows after the crew arrives, no vague allowances, no surprises. That price includes drop cloths on the floors, shoe covers at the door, and a photo of the clean-up before we leave.
Is cabinet installation in Fort Worth covered by any warranty?
Every Elmstead installation is covered by the 365-Day Done Right Promise: if it’s not done right after the job is complete, we make it right. Your cabinet warranty travels with the product itself, and because we install KraftMaid and Wellborn by name, you can verify the manufacturer’s warranty independently.
Why Fort Worth Families Choose Elmstead for Cabinet Installation
Graham Stein has been running Elmstead Remodeling Fort Worth since 2005, and the work is governed by the same Cedarwell Care Promise that every Elmstead location holds to: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. Those aren’t poster words. They’re the reason we put drop cloths down, photograph the floor before we leave, and hand you a written price at the estimate, not after the first delivery.
Families with children and pets hire us because we talk about the details that matter to them. We schedule noisy cutting for after school drop-off when we can. We ask where the baby is napping. We keep the back door closed so the dog doesn’t get out. We use pet-safe products where there’s a choice. And we leave the house in better shape than we found it, with photo proof.
If you’re planning cabinet installation in Fort Worth, call (682) 708-9180 for a free estimate. A live person answers the phone, 24/7. No voicemail box, no bot, no waiting until Monday. You’ll get a written price, a straight answer about your timeline, and a crew that treats your home like a home.
Pricing reflects the Fort Worth market as of 2026. Elmstead Remodeling Fort Worth offers free estimates – call (682) 708-9180.
Written by Graham Stein, Owner at Elmstead Remodeling Fort Worth, serving the Fort Worth area since 2005.
What Our Customers Say
"Two bathrooms done at once with kids and a dog in the house. They kept dust contained, were gentle with the pets, and left the place clean each day. Calm and careful."
- Paige Lindholm"Main bath gut and redo. They protected the carpet the whole way down the hall and vacuumed daily. Quiet during naps when they could be. Lovely finish."
- Franklin Mbeki"Two bathrooms at once with a dog in the house. Dust contained, gentle with the pets, place left clean each day. Calm and careful crew."
- Lourdes Medina
