Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Driveway Installation Cost in Fort Worth?
Paver driveway installation in Fort Worth typically costs between $7,000 and $18,000, with most homeowners paying around $11,500 for a standard two-car driveway using mid-range concrete pavers. The price includes excavation, base preparation, paver installation, and joint sand. A basic single-car driveway can come in near the lower end of that range, while larger driveways with permeable pavers, borders, or paver aprons that connect to the street push toward $18,000.
We give every family a written price before any work starts. That number does not change after the crew arrives, and it includes the details most contractors leave out: drop cloths where the crew walks, shoe covers at the door, and a photo of the clean-up before we leave. Call (682) 708-9180 for a free estimate on your driveway.
Paver Driveway Installation Cost Breakdown (2026)
Here is what a paver driveway project in Fort Worth looks like line by line, based on a standard two-car driveway of roughly 600 square feet.
| Line Item | Cost Range |
|---|---|
| Excavation and site prep | $1,200 – $2,500 |
| Gravel base installation (4 – 6 inches) | $900 – $1,800 |
| Edge restraints and bedding sand | $500 – $900 |
| Concrete pavers (standard, per sq ft) | $3,000 – $7,200 |
| Permeable pavers (upgrade, per sq ft) | $4,500 – $9,000 |
| Joint sand and compaction | $400 – $700 |
| Borders, soldier courses, or accent bands | $600 – $2,200 |
| Sealing (optional, first application) | $500 – $1,200 |
| Typical total project range | $7,000 – $18,000 |
What drives the number up or down in Fort Worth? The biggest factor is square footage. A compact single-car driveway of 250 – 350 square feet can land near $7,000, while a long suburban driveway with a turnaround and an apron across the sidewalk can exceed 1,000 square feet and sit at the top of the range. Paver style matters too: standard concrete pavers run $5 – $12 per square foot installed, while clay brick pavers or tumbled natural stone can reach $15 – $25 per square foot installed.
The second factor is the base. Fort Worth sits on expansive clay soils that shift with moisture. We recommend a minimum 4 – 6 inches of compacted crushed stone under any paver driveway, and on the blackland prairie soils east of the city we often go deeper. A contractor who skips or thins the base will hand you a driveway that sinks and separates within three to five years. That base work is not the place to save money.
What Affects Paver Driveway Installation Pricing in Fort Worth
- Driveway size and shape. Square footage is the baseline. Curves, aprons, and flare-outs near the garage add cuts and edge work, which adds labor hours and paver waste.
- Soil and base depth. Homes in Wedgwood, Ryan Place, and Arlington Heights often have stable sandy loam. Homes east toward Handley or south toward Everman sit on heavier clay that needs a thicker base. We read the soil before we quote the base; you will see that line item explained in your written price.
- Paver material and thickness. Standard 60mm concrete pavers handle passenger vehicles fine. If you park a heavy-duty truck or an RV, we recommend 80mm pavers, which cost more but will not crack under concentrated weight.
- Permeable paver requirements. Fort Worth updated its drainage standards in recent years, and some new builds in the Trinity River corridor are required to use permeable pavers. They cost $2 – $5 more per square foot installed but handle stormwater on-site and can reduce the drainage work your property needs elsewhere.
- Access to the site. If the crew cannot get a skid steer to the driveway from the street, the project gets more labor-intensive. Fenced backyards, narrow side gates, and mature trees all affect how material moves. We name this on the estimate rather than discovering it after we start.
- Demolition of an existing driveway. Removing and hauling old concrete or asphalt adds $1,000 – $2,500 depending on thickness and whether rebar is present. Homes built before 1980 in Fort Worth sometimes have poured concrete with wire mesh, which is slower to remove.
Paver vs. Concrete vs. Asphalt: What Does Each Cost in Fort Worth?
Families often ask us whether pavers are worth the premium over home concrete or asphalt. Here is the comparison for the Fort Worth market in 2026:
- Asphalt driveway paving: $3,500 – $9,000. Cheapest upfront, but Fort Worth summers soften asphalt, and the surface typically needs resealing every two to three years. Expect to replace an asphalt driveway in 15 – 20 years.
- Concrete driveway installation: $4,500 – $12,000. Lower upfront cost than pavers, but expansive clay soils crack concrete slabs. Repairs are visible, and a cracked slab is not a cosmetic fix.
- Driveway replacement (concrete or asphalt removed, new paver base installed): $5,000 – $14,000 before paver material. This is the full teardown-plus-rebuild scenario.
- Paver driveway installation: $7,000 – $18,000. Higher initial cost, but individual pavers flex with soil movement instead of cracking, and a single damaged paver can be lifted and replaced without cutting a whole slab.
Pavers are the right choice for Fort Worth’s soil. That flex matters: the clay beneath a driveway here does not stay in one place, and rigid surfaces cannot follow it. A paver driveway moves slightly and settles back. Concrete cracks and stays cracked.
How to Save on Paver Driveway Installation
There are ways to lower the project cost without lowering the quality of the base underneath.
Choose standard concrete pavers. The biggest material savings come from standard 60mm concrete pavers rather than clay brick, tumbled stone, or specialty shapes. The driveway still gets the full base prep and edge restraint system, which is where the longevity lives.
Keep the footprint simple. A straight-edged driveway with one border course costs less than one with flare-outs, curves, and inlaid accent bands. Every curve means more cuts, and cuts mean labor. A clean, simple layout with a strong soldier-course border still looks intentional.
Skip the first-year sealer. Sealing a new paver driveway is optional. Some families do it every three years to keep color consistent and repel oil stains; others skip it entirely. If you are not parking a leaking vehicle on the surface, you can defer that $500 – $1,200 line item.
Do the full base once. The most expensive paver driveway is the one installed over a thin base that fails in four years and has to be pulled up and reinstalled. We quote the base depth the soil needs, not the minimum we can get away with. Your written price reflects that, and the 365-Day Done Right Promise backs the work after it is complete.
Bundle it with other exterior work. If you are planning a Paver Driveway Installation in Fort Worth alongside a paver patio or a walkway, doing them in one project saves on mobilization, excavation equipment, and material delivery. Ask for the paver patio range ($3,500 – $11,000) when you call, and we will show you the combined number.
The simplest way to understand your real cost is a free estimate. Call (682) 708-9180 and we will walk the driveway with you, measure, and hand you a written price before any work starts. No estimate that grows after the crew arrives.
What Our Crew Does During a Paver Driveway Installation
If you have children or pets, you are probably less interested in aggregate sizes than in what happens to your house while the work is going on. Here is what a typical paver driveway project looks like with our crew.
Day one: protection and demolition. Before any tool starts, drop cloths go down on every interior path the crew will walk, and shoe covers go on at the door. If an old driveway is coming out, the crew sections it and loads it directly into a trailer, not into a pile on your lawn. Quiet tools come out during posted rest hours where possible, and we ask before moving anything near the work path, including bikes, trash bins, or planters.
Day two and three: base and compaction. The crew excavates to the depth the soil requires, installs geotextile fabric if the clay is expansive, then layers and compacts crushed stone. This is the loudest phase, and we schedule it around your family’s hours when we can. Pets stay inside or in the back yard while machinery is running, and we will tell you exactly when that is.
Day four and five: pavers and joints. Pavers go down on a screeded sand bed, edge restraints go in, and joint sand is swept and compacted. The crew hand-cuts borders and fills any gaps against the garage slab or sidewalk.
Day six: clean-up and photo. Before the crew leaves, they sweep the driveway, walk the perimeter for stray debris, and take a photo of the clean-up. That photo is included in every job, so you can see the condition we left the property in even if you were not home.
Graham Stein, who leads Elmstead Remodeling Fort Worth, holds the crew to the Cedarwell Care Promise on every project: clean up like it is our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work. That promise is not a tagline; it is the set of behaviors that govern how the crew works, and it is written into every project agreement.
Do Pavers Add Value to a Fort Worth Home?
Paver driveways generally add more curb appeal than the same square footage in poured concrete. That is a real consideration for families who plan to sell in the next five to ten years, and it is also a quality-of-life decision for families who plan to stay.
What matters most is that the driveway still looks flat and clean in year eight, not year two. We see paver driveways in older Fort Worth neighborhoods like Mistletoe Heights and Berkeley Place that are twenty years old and still hold their lines because the base was done right. We also see five-year-old paver driveways with sinking borders and spreading joints because the installer skimped on the stone underneath. The difference is never visible on day one. It shows up later.
A paver driveway also gives you a repair path that concrete does not: if one paver chips or stains, it can be lifted and replaced. If the base ever needs addressing, the pavers can be removed and reinstalled over a corrected base. Concrete and asphalt do not offer that second chance.
FAQs – Paver Driveway Installation Cost
How much does a paver driveway cost per square foot in Fort Worth?
Installed paver driveways in Fort Worth run $10 – $25 per square foot. Standard concrete pavers on a properly compacted base run $10 – $14 per square foot, while clay brick, tumbled stone, or permeable pavers can reach $18 – $25 per square foot installed. That range includes excavation, base, installation, and joint sand. Call (682) 708-9180 for a written per-square-foot price on your specific driveway.
Is a paver driveway cheaper than concrete in Fort Worth?
No. A concrete driveway in Fort Worth costs $4,500 – $12,000, while a paver driveway costs $7,000 – $18,000. Pavers cost more upfront because of the labor and base work, but they flex with Fort Worth’s expansive clay soil instead of cracking, and individual pavers can be replaced without cutting a slab. The long-term repair cost on concrete often narrows the gap within a decade.
How long does a paver driveway last in Fort Worth?
A paver driveway installed over a 4 – 6 inch compacted stone base typically lasts 25 – 40 years in Fort Worth before needing a base refresh. The pavers themselves rarely wear out; the joint sand needs replenishing every few years, and the base may need releveling after two or three decades of clay soil movement. A thin base will show sinking and spreading within five years.
Can you install a paver driveway over existing concrete?
We do not recommend it. Installing pavers over a cracked concrete slab transfers every existing crack up through the paver surface, and it raises the finished elevation above your garage slab and sidewalk. The right approach in Fort Worth is to remove the old concrete, correct the soil beneath, and build the base from the ground up. That is how a paver driveway stays flat.
How much does it cost to replace an old driveway with pavers?
Replacing an old concrete or asphalt driveway with pavers in Fort Worth runs $8,000 – $18,000 including demolition, haul-away, new base, and paver installation. Demolition of the old surface adds $1,000 – $2,500 depending on thickness and reinforcement. Call (682) 708-9180 and we will include the demolition line in your written price.
Do you offer free estimates for paver driveway installation in Fort Worth?
Yes. We walk the driveway with you, measure the square footage, check the soil, and hand you a written price before any work starts. The estimate is free, and the price does not change after the crew arrives. Call (682) 708-9180 to schedule a walk-through.
Contractor Checklist Before You Sign
Before you pick a contractor for a paver driveway in Fort Worth, ask these questions. A good contractor answers them without hesitating.
- “What base depth are you quoting, and why?” If the answer is less than 4 inches of compacted stone on Fort Worth clay, ask what soil data they are using. The base is the project’s backbone.
- “What is included in the written price?” Does it cover excavation, haul-away, edge restraints, joint sand, and clean-up? Or are those called “add-ons” after the fact?
- “Who will be on my property?” Our technicians are background-checked and uniformed, and you will know who is walking through your door before they arrive.
- “What happens if the driveway settles or a paver chips in year one?” Our answer is the 365-Day Done Right Promise: if it is not done right, we make it right. The longest-standing post-project commitment in our service area.
- “Can I reach someone after hours?” A live person answers our phones 24/7. Not a voicemail box, not an automated system, not a next-business-day callback.
Ready for a Written Price on Your Fort Worth Paver Driveway?
If you are considering a paver driveway, the next step is simple. Call (682) 708-9180 and schedule a free walk-through. We will measure the driveway, check the soil, talk through paver options from named manufacturers you can research by name, and hand you a written price before any work starts. Shoe covers and drop cloths on every visit. A photo of the clean-up before we leave. And a live person on the phone whenever you call.
Written by Graham Stein, Owner at Elmstead Remodeling Fort Worth, serving Fort Worth since 2005.
Pricing reflects the Fort Worth market as of 2026. Elmstead Remodeling Fort Worth offers free estimates – call (682) 708-9180.
What Our Customers Say
"Two bathrooms done at once with kids and a dog in the house. They kept dust contained, were gentle with the pets, and left the place clean each day. Calm and careful."
- Paige Lindholm"Main bath gut and redo. They protected the carpet the whole way down the hall and vacuumed daily. Quiet during naps when they could be. Lovely finish."
- Franklin Mbeki"Two bathrooms at once with a dog in the house. Dust contained, gentle with the pets, place left clean each day. Calm and careful crew."
- Lourdes Medina
